[Banana Clipper]

I used BMWhat to code the 'corner delete mod' but the lights remained on. I've read several other threads where this has happened to others and they simply code out the corner lights using NCS Expert but when I go into NCS Expert and look for SIDEMARKER_US it already says nicht_aktiv meaning that it is already disabled so what am I missing?

[MERLIN335i]

With BMWhat, I wanted just to turn on the rear lights with front DRL's, so I just coded "rear lights on" in DRL section. They still did not come on, so asked Carly, the reply said I needed to set 8 other settings a certain way within the DRL section just to get just rear lights on, followed their instructions and it worked.

Not your scenario, but I hope you see my point, may not be just setting one parameter to non-active, you may need to adjust other settings to get what you want.

HTH.

[Dopeslope]

I've found the above out also, comfort access makes a difference to somethings too.eg the alarm chirp on my non ca is a couple of things but on my bros with ca it's about 12 things to set.

Hopefully some one who knows will chime in

[Banana Clipper]

I checked the MyCarly site, turned all these off:

Corner LEDs
• active
• not active
Corner LEDs are active/not active – also known as ‘Corner Delete Mod’. This function often only works on US models to deactivate the corner LEDs. (FRM)

Corner LEDs brightness – low beams
• off
• low
• medium
• high
“Brightness of corner LEDs when low beams are active. (FRM)
”

Corner LEDs brightness – high beams
• off
• low
• medium
• high
“Brightness of corner LEDs when high beams are active. (FRM)"

and still nada so I'll shoot them an email like you said to see what they think


*** EDIT***
So I emailed them and was told to uninstall the app and re-install and still doesnt work. I've replied back to them and will update when I hear back.