[Kenneykickin]

A broken I drive?

06 330xi

[thkfast]

Step 1
Insert key into slot
Step 2
Press start/stop button without depressing clutch/brake and wait for the service reminder to dissapear.
Step 3
Immediately after service reminder goes out, press and hold the odometer reset. After 3 secs a warning triangle will appear, keep the odo. button pressed and after another 2-3 secs the Oil can will appear. I f you hold it too long (10 secs in total) you will overshoot the runway and some German writing will appear giving the software level/ can bus etc. of the car. Go back to the beginning and start again.
Step 4
You are now in the service menu, use the toggle switch on indicator stalk to scroll up/down through the various service items.
Step 5
When you have the item you want to reset showing, press the BC button on end of indicator stalk. Reset should now appear in the display. Press in and hold the BC button for 2-3 secs and a clock will start whirling around and hey presto, its done
Step 6
You can now either scroll up/down to select another item (as in step 4) or you can press the start/stop button to exit.

[N54Twin]

Originally Posted by Kenneykickin

A broken I drive?

06 330xi

YOUTUBE.

[Kenneykickin]

Originally Posted by thkfast

Step 1
Insert key into slot
Step 2
Press start/stop button without depressing clutch/brake and wait for the service reminder to dissapear.
Step 3
Immediately after service reminder goes out, press and hold the odometer reset. After 3 secs a warning triangle will appear, keep the odo. button pressed and after another 2-3 secs the Oil can will appear. I f you hold it too long (10 secs in total) you will overshoot the runway and some German writing will appear giving the software level/ can bus etc. of the car. Go back to the beginning and start again.
Step 4
You are now in the service menu, use the toggle switch on indicator stalk to scroll up/down through the various service items.
Step 5
When you have the item you want to reset showing, press the BC button on end of indicator stalk. Reset should now appear in the display. Press in and hold the BC button for 2-3 secs and a clock will start whirling around and hey presto, its done
Step 6
You can now either scroll up/down to select another item (as in step 4) or you can press the start/stop button to exit.

Hey appriate you're reply. Thanks.

When when I'm pressing down the bc it doesn't show a reset it just goes straight to the weird German writing I can't get past that part.

[Kenneykickin]

Originally Posted by Kewill0360

YOUTUBE.

I have searched about it and can't figure it out obviously having problems that's why I'm asking.

Go get you're +1 post being ignorant somewhere else.

[N54Twin]

Originally Posted by Kenneykickin

I have searched about it and can't figure it out obviously having problems that's why I'm asking.

Go get you're +1 post being ignorant somewhere else.

SEARCH and then talk SHi.......


U not having any problems, just doing it WRONG.

[ducatiti]

Originally Posted by Kenneykickin

Go get you're +1 post being ignorant somewhere else.

[thkfast]

I just did this yesterday on my car.

Press the START/STOP button so accessories are all on.
Hold down the ODOMETER reset button about 3-4 seconds until a service warning image is displayed on the DIC.
Use the scroll thingy on the turn signal stalk to display the service you want to reset.
Press the BC button on the end of the turn signal stalk until RESET is displayed.
Hold the BC button in for about 7 seconds while a little "timer" looking display spins around.
It should be RESET.
Turn car off by pressing START/STOP button.

There ya go!