[mastrchee]

UPDATE: *SOLD*

Bought recently and half way through fitting it I had a change of heart! I prefer the carbon look and I was going to wrap it, but I don't have the time nor the patience for it!

So here goes... Its an aftermarket M-Performance style front splitter, high quality PU, Unpainted, OEM fit M-Sport bumpers.

M-sport bumpers should already have holes pre-drilled for the splitter (mine does), which aligns with this splitter (oem fit). The middle screws will require a bit of elbow grease as there are no pre-drilled holes (same as the OEM splitter). It comes with the necessary screws, c-clips, nuts & bolts, etc (unused). You will need to re-apply some 3M automotive grade double tape. Some minor storage marks as it comes unpainted, but otherwise its in fairly new condition!

If the matt look is not your cup of tea, I would recommend wrapping it (carbon?) or painting it.

Bought for £395 (ebay), looking for £300 ONO which is a bargain!

Collection preferred (kingston upon thames or notting hill gate london) but can post.

Some pictures half way through the install, the gaps are because its not fully fitted:

[Black16]

PM me your number I know someone interested

[mastrchee]

Originally Posted by Y90MB

PM me your number I know someone interested

PM'ed

[teaston]

On another subject, your wheels look really good! Are they Ferric Grey?

[mastrchee]

Originally Posted by teaston

On another subject, your wheels look really good! Are they Ferric Grey?

Thanks - not exactly, imagine orbit grey with a very very slight hint of metallic bronze. Its very similar to the inner colour of the 442m orbit grey alloys:

[teaston]

Originally Posted by mastrchee

Thanks - not exactly, imagine orbit grey with a very very slight hint of metallic bronze. Its very similar to the inner colour of the 442m orbit grey alloys:

I see, so a fair bit darker than ferric. Did you do it because you'd kerbed your wheels?

[mastrchee]

Originally Posted by teaston

I see, so a fair bit darker than ferric. Did you do it because you'd kerbed your wheels?

no just for funsies. but it has had a couple of minor kerbing since and I've managed to patch them myself.

[mastrchee]

*SOLD*, thanks Y90MB