[toastie]

I'm curious to know if there are performance parts being offered currently for the M235i that are transferrable to the M2. Going to start a list so we can keep track of the available options to squeeze more out of this car.

1. VRSF Charge Pipe
2. Fabspeed Muffler Bypass
3. Wagner Intercooler
4. Evolution Racewerks Charge Pipe
5. Evolution Racewerks Down Pipe
6. Burger Tuning JB4

[Bmwbb]

An addon to this question. Is the fabspeed sport cat from m235 transferable to m2?

[toastie]

As new info arrives, I'll update the list.

[BD_F22]

Fabspeed muffler bypass is not compatible, you would need to buy the M2 specific one with the quad tips

[BD_F22]

Wagner intercooler is compatible, ER chargepipes, JB4, almost every intake, ER DP, Fabspeed DP, etc

[toastie]

Updated

[pup73]

Originally Posted by BD_F87

almost every intake

Not the BMS intake...CEL!

-c

[BD_F22]

Originally Posted by pup73

Not the BMS intake...CEL!

-c

BMS intake is compatible, it gave me a CEL on my m235i as well. Just one of those things but the CEL doesn't make it not compatible

[Fabspeed Motorsport]

Originally Posted by BD_F87

Fabspeed muffler bypass is not compatible, you would need to buy the M2 specific one with the quad tips

You are correct. The Muffler Bypass Exhaust is not transferrable from the M235i to the M2.

[pup73]

Originally Posted by BD_F87

BMS intake is compatible, it gave me a CEL on my m235i as well. Just one of those things but the CEL doesn't make it not compatible

Sure. You're right. However, I, as well as others, noticed a rough idle with the BMS intake, as well as a CEL. And the CEL is actually a different error from the one m235 guys were getting. John and Terry from BMS were at a loss. But that was awhile ago. Maybe they came up with a solution. Some chalk it up to the rather loose connection for the vacuum hose. YMMV

-c

[toastie]

Anyone know if BMS is developing a intake for the F87?

[mike@x-ph.com]

Originally Posted by toastie

I'm curious to know if there are performance parts being offered currently for the M235i that are transferrable to the M2. Going to start a list so we can keep track of the available options to squeeze more out of this car.

1. VRSF Charge Pipe
2. Fabspeed Muffler Bypass
3. Wagner Intercooler
4. Evolution Racewerks Charge Pipe
5. Evolution Racewerks Down Pipe
6. Burger Tuning JB4

Everything should fit except the muffler bypass

[mike@x-ph.com]

Originally Posted by toastie

Anyone know if BMS is developing a intake for the F87?

BMS M235 intake will fit

Originally Posted by BD_F87

BMS intake is compatible, it gave me a CEL on my m235i as well. Just one of those things but the CEL doesn't make it not compatible

Not all cars get CEL

Use the JB4 and it will hide the code