|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Does this tint look correct to you guys?
|
|
04-30-2008, 04:44 PM | #1 |
Enlisted Member
15
Rep 41
Posts |
Does this tint look correct to you guys?
I read about the dot matrix issues with tints and I am not sure what is consider an acceptable job. I went to the suppose best tint place in socal, song's tint masters and got the expensive 30% huper for $500! I just took these two pics, do you guys think this is best i can get?
not the best pics, but its gloomy today and there are still dusts from the fire few days ago. this is already after the two weeks touch up, and i am not too happy with the results. I ask them if they could redo the rear tint, but they tried to scare me by saying that they cant guarantee the results will be any better, and that the rest of glass might get worst due to glue in the films the second time, any truths to that? is it really that bad to re-tint the same location? the rest of the windows is awesome, but the rear dot matrix is getting on my nerves every time i look back there! i am not expecting perfection, but i thought the results would be better for $500. Should i risk it and ask them to re-tint or should i leave it along? Thanks! |
04-30-2008, 04:48 PM | #2 |
¡Viva España!
373
Rep 7,803
Posts |
Damn for 500.00, I would definitely have them redue,especially if your not happy. By the looks of the pics, it doesnt look like it took too well.
__________________
23 G42 230i Mineral White Cognac, Aluminum With Mesh Effect Interior Trim MODS Clear Guard, 15% Ceramic Tint, Floating Caps
|
Appreciate
0
|
04-30-2008, 04:48 PM | #3 |
boku no namae ha...
336
Rep 11,025
Posts
Drives: 2006 BS 330i
Join Date: Feb 2006
Location: S. Bay Area, CA + Newark, NJ + ChiCity + True Blue
|
did you research any of your tints before you bought it? huper optik is alot thicker than your average tint film. it was originally made for building windows, which is very different from the windows you find on cars... its gonna be less flexible and harder to use on the contour of the e92's rear window. alot of places wont recommend it just because they know the quality wont be up to par. its not always how good the service can be... sometimes the film you pick limits the quality of the work on the specific car.
i'd get it redone using another tint.
__________________
looking for a PreLCI Black Sapphire e90 front bumper without license plate holes
"Akimbo shotguns. Broken wrists anyone? And don't give me that 'it's just a game' bull****. Where the **** are my akimbo interventions then?! One scope on each eye mother****er!!" |
Appreciate
0
|
04-30-2008, 04:55 PM | #4 |
Now With 33% MORE Sarcasm Free!
157
Rep 3,462
Posts |
Looks about typical though you would hope for better @$500... But yeah, mine looks a little better but it's also not ceramic.
__________________
A BMW is Just a Car, it doesn't make you smart, handsome, clever, better, cool, or wealthy. |
Appreciate
0
|
04-30-2008, 05:10 PM | #5 |
Mod Virgin
8
Rep 62
Posts |
The dot matrix is never going to be perfect, but it should look better than this IMO. There is a possibility it may get better as the tints settle, but if it stays like this after a week, I would complain and get them to redo it.
__________________
- - -
'08 e92 335 - Sparkling Graphite, Black/Gray Wood, 6MT, Options: Every one I could afford + M Shift Knob & M eBrake, Smoke reflectors, F1 Tint 35%, CF license frame, CF Roundel overlays (on wheels), Aluminium pedals, Machined Aluminium Air Con. Dials - - - |
Appreciate
0
|
04-30-2008, 05:12 PM | #6 |
Major
29
Rep 1,381
Posts |
I would get out there in the middle of the day when it's hot and try to push the bubbles out. It can be done properly if the tinter has the motivation to do so. If you're not happy about it bring it back and tell them that.
__________________
2008 BMW 335i: Jet Black, Jade Gray, Gray Poplar, 6MT - Stock... for now.
|
Appreciate
0
|
04-30-2008, 05:29 PM | #8 |
Enlisted Member
15
Rep 41
Posts |
Has anyone gotten their tints to be redone before? any truths to the suggestion that there might be glue or left over lint when they remove the current film and apply another? i am happy with the rest of the result, just the rear dot matrix area that is ticking me off
|
Appreciate
0
|
04-30-2008, 05:56 PM | #9 |
Banned
169
Rep 12,680
Posts
Drives: like an asshole
Join Date: Feb 2008
Location: Chicago Burbs
|
have them cut that area out and put some black vinyl over it looks nice
|
Appreciate
0
|
04-30-2008, 06:12 PM | #10 |
Major
122
Rep 1,369
Posts |
it doesnt look bad. they cant get it much better. its not the tinter its the matrix in the way. depending on how old the tint is, like if you just got it done within a day. try to smooth out the middle part to the top line with your fingers, thats why i did.
__________________
|
Appreciate
0
|
04-30-2008, 06:23 PM | #11 |
boku no namae ha...
336
Rep 11,025
Posts
Drives: 2006 BS 330i
Join Date: Feb 2006
Location: S. Bay Area, CA + Newark, NJ + ChiCity + True Blue
|
huper optik is an expensive film
__________________
looking for a PreLCI Black Sapphire e90 front bumper without license plate holes
"Akimbo shotguns. Broken wrists anyone? And don't give me that 'it's just a game' bull****. Where the **** are my akimbo interventions then?! One scope on each eye mother****er!!" |
Appreciate
0
|
04-30-2008, 07:34 PM | #13 |
Private
4
Rep 86
Posts |
i got mine done for $130 all the way around, and it looks way better than that. I noticed my tint did look better after a week or so, after the sun baked out any of the residual adhesive via diffusion through the plastic film. as with any adhesive, it can be removed with a solvent, so any argument that they put up about leaving residual adhesive around is BS, because all they have to do is get a guy out there for 15 minutes with some solvent and a rag and it will come off. Just be careful they aren't reckless and spill it on the interior, as it will be a volatile substance and the interior will WREAK! Get it redone.
|
Appreciate
0
|
04-30-2008, 07:58 PM | #14 |
Live life in this lane....
13
Rep 327
Posts |
In Chicago, where it is illegal to have front window tints, there is a limited selection of premium tint installers (huper and F1). Due to this, a madico/llumar non cermaic tint will run about 250, F1 is 375, Huper around 450. With the OP being in LA, I would imagine you could get it cheaper than a half grand, take it back and opt to get it redone or get some money back.
__________________
'08 E92 335xi: the girlfriend
'04 Yamaha R6: the mistress '99 Mustang Cobra: the wife |
Appreciate
0
|
04-30-2008, 08:53 PM | #15 | |
Captain
72
Rep 929
Posts
Drives: E90 2007 328xi
Join Date: Dec 2006
Location: LIC NY / Central NJ
|
Quote:
__________________
E90 2007 / Step / Montego Blue / Black Dakota Leather / Premium / Cold Weather
MODS: Exterior: Blacklines, debadged, HO ceramic 35% tint, Hoen yellow fogs, matte black grille, OEM style splitters, Halogen-to-Xenon Interior: Alum pedals, CF wrapped trim, V1 and Nuvi hardwire, M-Tech tri-stitched wheel, SMG M5 shift knob Performance: AluFelgen CSL 19" 8.5 ET33/9.5 ET30 with 5mm rear spacers | GY Eagle F1 Asym 235/265, KW V3, BMW Perf exhaust+intake |
|
Appreciate
0
|
04-30-2008, 09:00 PM | #16 |
Major
55
Rep 1,182
Posts |
Yeah for $500 I would definitely want it redone. Like just4kickz said, HO is a thicker tint, but I would expect them to do better than that. I got F1 Pinnacle Ceramic done for $330 and its flawless on the dotmatrix. I'd say give it a couple days in the sun and see if it works in a bit and if it doesn't maybe try a different film.
__________________
2006 330i E90 || Jet Black on Terra || STEP | ZSP | ZPP | FULL M-tech Kit | Linea Corse LC818's / 19x8.5 ET30 / 19x10 ET22 / Falken FK452's | 35% Pinnacle Tint | Blacklines | CF Trim & Roundels | Predator ICE | Alarm | Cosmos Fogs | Smoked Corners w/ X5 Bulbs | BMW Performance Grills | BMW Performance Steering Wheel | M Sport E-Brake | ACS Roof Spoiler & Pedals | M3 Spoiler | Euro Fog Switch | Paddle Retrofit Kit | CF Mtech Splitters
|
Appreciate
0
|
04-30-2008, 09:02 PM | #17 |
Drives Smart
54
Rep 2,393
Posts |
I got all mine done for 210$ and it is perfect!!! Probably best place in town 2
__________________
08 BMW ///M5 Space Gray/Black 6 speed Engine: RPi GTS exhaust, RPi Scoops, Carbon Filter Delete Exterior: Glossy Black Kidneys, LUX V3, OEM LED License Plate light, Bruce License Plate Adapter |
Appreciate
0
|
05-01-2008, 12:10 AM | #19 | |
Lieutenant
24
Rep 453
Posts |
Quote:
__________________
|
|
Appreciate
0
|
05-01-2008, 12:12 AM | #20 |
Major
48
Rep 1,265
Posts
Drives: 2011 BMW X5 Sport
Join Date: Jan 2008
Location: Escondido, Ca
|
I paid 175 and mine looks 10 times better. You better go back.
__________________
2011 X5 Sport
Black Sapphire w/ Black Perforated Nevada/ DK Bmboo Technology/ Vented Seats/ Cold & Convenience / Multi Contour seats/ 20" wheels and more... 2004 Mustang GT Vert. - Modded |
Appreciate
0
|
05-01-2008, 12:22 AM | #22 |
boku no namae ha...
336
Rep 11,025
Posts
Drives: 2006 BS 330i
Join Date: Feb 2006
Location: S. Bay Area, CA + Newark, NJ + ChiCity + True Blue
|
you should be fine when removing tints... i mean if the shop you went to was as professional as you say they are... it'll be like another job for them... all they really do is cut the tint slightly and peel it off... then use googone to remove the residue. i cant remember if the defroster lines are an issue, but i think you'll be fine.
__________________
looking for a PreLCI Black Sapphire e90 front bumper without license plate holes
"Akimbo shotguns. Broken wrists anyone? And don't give me that 'it's just a game' bull****. Where the **** are my akimbo interventions then?! One scope on each eye mother****er!!" |
Appreciate
0
|
Bookmarks |
|
|