[AVCI1]

I want to turn off the front fog lights. How do I wipe ?
My car f33

[atzebmw]

What do you mean?
Turn off forever or only in the corners?

[enes28]

I think, do mapping nebelscheinwerfer output or pwm 00

[AVCI1]

Originally Posted by atzebmw

What do you mean?
Turn off forever or only in the corners?

I want to close forever.

[Kingpin4]

How about turn off corners only?

[atzebmw]

Originally Posted by AVCI1

I want to close forever.

OK, then i would suggest to delete the 520 from the VO and code the FEM.

[AVCI1]

Originally Posted by atzebmw

OK, then i would suggest to delete the 520 from the VO and code the FEM.

After deleting VO 520 code, FEM, what do I do ?

[atzebmw]

Originally Posted by AVCI1

After deleting VO 520 code, FEM, what do I do ?

Delete the 520 from the VO.
Save the VO.
Then go to Expert Mode -> Coding.
Load the saved VO, activate it.
Read VCM or Read Ecu.
On the left side mark the FEM.
On the right side push the button "Code".
Then all codings will be set to standard in relation to your VO( without 520).

[AVCI1]

Originally Posted by atzebmw

Delete the 520 from the VO.
Save the VO.
Then go to Expert Mode -> Coding.
Load the saved VO, activate it.
Read VCM or Read Ecu.
On the left side mark the FEM.
On the right side push the button "Code".
Then all codings will be set to standard in relation to your VO( without 520).

VO code How do I wipe it ? Could you show him as well ?

[atzebmw]

Originally Posted by AVCI1

VO code How do I wipe it ? Could you show him as well ?

Sorry, don‘t understand your question.
What do you mean with wipe?

[AVCI1]

Originally Posted by atzebmw

Sorry, don‘t understand your question.
What do you mean with wipe?

VO 520 how to delete the code ? Can you show picture ?

[atzebmw]

OK understand ....

Read VO
Edit VO
SALAPA Element
Delete 520 including comma
Assume
Save
and then the other steps from above

[AmericanLovingEuroStyle]

Hello, First of all thank you for opportunity to be part of this great forum. I was reading this post looking for some insight on this permanent coding delete of the front fog lamps. I have successfully deleted the 520 from VO Coding and also made the necessary changes to the FEM as well. (I THINK) The error for the fog lights is gone but if I push the fog light button on my dash then I get the error again. How can I make the physical button useless if possible? Any help would be greatly appreciated.

[Johnny250]

Originally Posted by AmericanLovingEuroStyle

Hello, First of all thank you for opportunity to be part of this great forum. I was reading this post looking for some insight on this permanent coding delete of the front fog lamps. I have successfully deleted the 520 from VO Coding and also made the necessary changes to the FEM as well. (I THINK) The error for the fog lights is gone but if I push the fog light button on my dash then I get the error again. How can I make the physical button useless if possible? Any help would be greatly appreciated.

don't press it

[IAmATeaf]

Originally Posted by Johnny250

don't press it

LOL reminds of the joke,

Patient “Doctor it hurts when I do this”
Doctor “Well don’t do it!”

[AmericanLovingEuroStyle]

LOL! Easier said than done! When you have a wife pushing buttons "literally" I do not want to deal with erasing that code over and over.