12-29-2017, 07:15 AM | #1 |
Lieutenant
205
Rep 413
Posts |
Bimmercode Link problem
Hi all I do not suggest to use this app to control the exhaust valve, the app generate some problem on the valve because after this the car reduce the burbling and noise exhaust. I try to restore cafd file of dme2 with esys but an error come and cafd have been corrupted.
In the end I inject cafd as for the procedure and everything now is ok and burbling came again. Ps when file was corrupted engine run but an error accour about fuel delivery... Hope this post will save all of you have this app |
12-31-2017, 04:28 PM | #2 |
Brigadier General
10933
Rep 4,551
Posts
Drives: 2015 328d xDrive
Join Date: Aug 2010
Location: NoVA
|
I have/use this app and it works perfectly for me. Haven't noticed any negative volume or sound changes as a result.
2017 6MT Fabspeed DP + Remus Catback istep NBTevo L17193I iPhone X (11.2.1) Bimmerlink 1.2.7 (3996) |
Appreciate
1
NYC Bimmer259.50 |
01-01-2018, 04:50 AM | #3 |
Lieutenant
439
Rep 554
Posts |
I also use Bimmerlink without issue (LCI 6MT), & whilst I now keep the exhaust flap open and ASD off I did use the app to alternate these settings several times while deciding what I preferred. I always switch to Sport+ once engine oil reaches 80-90degC and can confidently say I have no problems with burbling or exhaust level. As a side, with the help of Google translate I also found the readings for water temp & oil pressure
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|