[MrNice2028]

Hi

I want to software update my combox, because i have some bluetooth quality and song information issues, when using android devices. Strangely iPhone works perfectly.

Well, can anyone provide me with a link for the parts/cable, a DIY installation guide, and DIY coding guide using NCS Expert

Car: 2011 320d 184hk E90 M-sport aut.

Thanks.

UPDATE: Retrofit and coding done. It all worked out!!!

I Used this kit from eBay.
https://www.ebay.com/sch/i.html?_fro...23608&_sacat=0

Coding guide:

Adding Option 6FL
Step One – Adding $6FL
Open INPA and verify that it is connected properly.  Close INPA when verified.
Open NCSEXPERT and load profile  Expertenmosus (Werkseinstellung).
Press VIN/ZCS/FA (F1)
Press ZCS/FA f. ECU (F3)  Choose the E89 chassis  Choose CAS or NFRM
Press Enter FA (F2)  Choose E89
Enter VIN: WBAxxxxxxxxxxxx  OK
Add $6FL  OK
Press Back (F6)
Press Process ECU (F4)  Choose CAS
Press Change Job (F2)  Choose FA_WRITE  OK
Press Execute job (F3)
Press Change ECU (F1) –> Choose NFRM
Press Execute job (F3)

Step Two – Code changes to CIC
Open INPA and verify that it is connected properly.  Close INPA when verified.
Open NCSEXPERT and load profile  Expertenmosus (Werkseinstellung).
Press VIN/ZCS/FA (F1)
Press ZCS/FA f. ECU (F3)  Choose the E89 chassis  Choose CAS or NFRM
Press Back (F6)
Press Process ECU (F4)  Choose CIC
Press Change Job (F2)  Choose SG_CODIEREN
Press Execute job (F3)
Press Process ECU (F4)  Choose MEDIA
Press Execute job (F3)
Done

Connected the eBay cable kit (Used black COMBOX plug) and Downloaded Bluetooth update from BMW update site, and updated. Now song information it displayed perfect.

[smass]

Others will comment on the coding but as for the wiring see below.

I have not tried this but I think the aftermarket USB will plug to the combox. Some of the plastic plug may need to be trimmed with a razor. Then you can do the above software update from the trunk. Using the correct arm rest parts will be over $75 US.

https://www.ebay.com/itm/USB-Cable-A...itleDesc=0%7C0

[MrNice2028]

Originally Posted by smassey321

Others will comment on the coding but as for the wiring see below.

I have not tried this but I think the aftermarket USB will plug to the combox. Some of the plastic plug may need to be trimmed with a razor. Then you can do the above software update from the trunk. Using the correct arm rest parts will be over $75 US.

https://www.ebay.com/itm/USB-Cable-A...itleDesc=0%7C0

OK. So I would be able to update the combox by just adding a USB Cable? It make sence, but can anyone confirm that this will work. I dont care about the OEM USB plug under the armrest, just want to update Bluetooth and hopefuly it will fix the android sound quality and song information.

Thanks smassey

[smass]

Some basic coding will need to be done to enable the USB port on the combox. You will want to add 6FL in the FA, write it to the CAS and then do a SG reset on the combox. I probably said that wrong so hopefully others will comment but do your research. http://codinge90.com/ncs-expert-how-...vehicle-order/


Then do the below link to update the bluetooth software on the combox. I will PM you a vin so you can download the software.
https://www.bmw.com/en/footer/software-updates.html

[MrNice2028]

Originally Posted by smassey321

Some basic coding will need to be done to enable the USB port on the combox. You will want to add 6FL in the FA, write it to the CAS and then do a SG reset on the combox. I probably said that wrong so hopefully others will comment but do your research. http://codinge90.com/ncs-expert-how-...vehicle-order/


Then do the below link to update the bluetooth software on the combox. I will PM you a vin so you can download the software.
https://www.bmw.com/en/footer/software-updates.html

Thanks again