[Richukbmw5]

Looking at options on lowering springs. I spoke to eibach today and they don't have any plans to release the pro kit for the 530e.

I don't fancy H&R due to bad experiences in the past.

That leaves AC schnitzer which I believe have springs made by eibach anyway. I can't find them online, anyone have any info they can share?

[r33_RGSport]

Do you have M Sport suspension package or not?

[Richukbmw5]

Originally Posted by r33_RGSport

Do you have M Sport suspension package or not?

I have an M sport car yes, but BMW don't offer M sport suspension (lowered springs) on the 530e.

I have standard shocks, so no Variable dampers.

[r33_RGSport]

Originally Posted by Richukbmw5

I have an M sport car yes, but BMW don't offer M sport suspension (lowered springs) on the 530e.

I have standard shocks, so no Variable dampers.

PM me last 7 of your VIN.
Let me check.
Because I installed H&R on 530e M Sport and it rode fine.
Ride a little stiffer than stock, but not bouncy.

[Richukbmw5]

Originally Posted by r33_RGSport

PM me last 7 of your VIN.
Let me check.
Because I installed H&R on 530e M Sport and it rode fine.
Ride a little stiffer than stock, but not bouncy.

I got a reply from AC schnitzer this morning advising they have no plans for lowering springs.

So H&R is the only option for the 530e.
The correct part number is 28721-5.

Image courtesy of Shmeidmann
https://www.schmiedmann.co.uk/en/pro...roduct=28721-5

[r33_RGSport]

Yea, H&R just released it.

[snorkelface]

Any update on other offerings? Those H&R springs are just too low. PLus, they seem to sag in the rear. I don't think they really compensated for the battery weight in the rear.

[r33_RGSport]

Originally Posted by snorkelface

Any update on other offerings? Those H&R springs are just too low. PLus, they seem to sag in the rear. I don't think they really compensated for the battery weight in the rear.

I believe so far only H&R that have the specific spring for 530e.
The pictures that I post are using the non 530e springs.

Other than that, your option is KW V3 coilover.

[snorkelface]

Originally Posted by r33_RGSport

I believe so far only H&R that have the specific spring for 530e.
The pictures that I post are using the non 530e springs.

Other than that, your option is KW V3 coilover.

What's your opinion on wheels spacers for the 530e with the same 19" M Sport wheels you have? 12mm/15mm, or does 15mm/20mm work better with these wheels when lowered?

[r33_RGSport]

Originally Posted by snorkelface

What's your opinion on wheels spacers for the 530e with the same 19" M Sport wheels you have? 12mm/15mm, or does 15mm/20mm work better with these wheels when lowered?

If you lower the car, I would to 15/20 for aggressive look.
12/15 more to the conservative side or if it not lowered.

[snorkelface]

Originally Posted by r33_RGSport

If you lower the car, I would to 15/20 for aggressive look.
12/15 more to the conservative side or if it not lowered.

Thanks for the input! I'm trying to get Eibach to use my car to develop springs since I'm local, but no reply. Oh well!

[r33_RGSport]

Originally Posted by snorkelface

Thanks for the input! I'm trying to get Eibach to use my car to develop springs since I'm local, but no reply. Oh well!

Well, if you decided to go different route, let me know.

[Richukbmw5]

Originally Posted by snorkelface

Thanks for the input! I'm trying to get Eibach to use my car to develop springs since I'm local, but no reply. Oh well!

Already tried this myself and spoke to them, however all their development is done in Germany and not the US or in my case the UK.

[GoldenStateBuckeye]

I have H&R springs, bolts and spacers for the 530e. I just took them off after about 3k miles (like new) to put on the G11 20" wheels.

They are for sale if anyone is interested. PM me..

[Brake_Late]

Originally Posted by Sarang5

I have H&R springs, bolts and spacers for the 530e. I just took them off after about 3k miles (like new) to put on the G11 20" wheels.

They are for sale if anyone is interested. PM me..

You have pm

[Judahzlion]

Hi everyone.

on my new 530e I have tried to replace the lowering springs from H&R H&R 28721-5.
I drove it for 2 weeks thinking it will get better. However, it was jumpy and uncomfortable.
I took a bite and replace mine with KW Coil Over STREET COMFORT Part #: 180200BY

This one is with Electronic dampers since mine originally was.
Nicely lowered very.. Very comfortable. However at the maximum high position it is too low and you can not get is any higher. I needed to raise it up at least 1/2" and can not. Unfortunately KW has recalled this product calling it unfit until another product is made and I have removed and replaced factory shocks again.

I have H&R Springs 28721-5 available for quick sale....

PM if interested ..

[FoxberryJam]

Originally Posted by r33_RGSport

If you lower the car, I would to 15/20 for aggressive look.
12/15 more to the conservative side or if it not lowered.

I concur...

[chris_sd]

I am not that happy with the H&R springs either. They are sitting a bit to low and ride is to harsh. I have warped the front rims several times already. However, the stock springs are sitting way to high and does not look good. Anyone have any ideas on something in between?

Christer

[PetieD 7]

Originally Posted by chris_sd

I am not that happy with the H&R springs either. They are sitting a bit to low and ride is to harsh. I have warped the front rims several times already. However, the stock springs are sitting way to high and does not look good. Anyone have any ideas on something in between?

Christer

Check out the MSS adjustable spring kit. You can obviously lower the vehicle to your spec, and maintain the ride comfort at the same time. Although, it is on the pricey side when compared to other lower spring kits such as Eibach.

[AD51YYY]

Originally Posted by chris_sd

I am not that happy with the H&R springs either. They are sitting a bit to low and ride is to harsh. I have warped the front rims several times already. However, the stock springs are sitting way to high and does not look good. Anyone have any ideas on something in between?

Christer

Did you get H&R specific for the 530e? It's a right nightmare this. Seems like BMW couldn't be bothered to make m sport springs specifically for this engine!

[AD51YYY]

Originally Posted by Judahzlion

Hi everyone.

on my new 530e I have tried to replace the lowering springs from H&R H&R 28721-5.
I drove it for 2 weeks thinking it will get better. However, it was jumpy and uncomfortable.
I took a bite and replace mine with KW Coil Over STREET COMFORT Part #: 180200BY

This one is with Electronic dampers since mine originally was.
Nicely lowered very.. Very comfortable. However at the maximum high position it is too low and you can not get is any higher. I needed to raise it up at least 1/2" and can not. Unfortunately KW has recalled this product calling it unfit until another product is made and I have removed and replaced factory shocks again.

I have H&R Springs 28721-5 available for quick sale....

PM if interested ..

Hi there, I am considering purchasing the H&R 28721-5, the ones specific for the 530e..what were your thoughts on this spring? What do you mean when you say jumpy? I can't budget for coilovers and really don't want to go for springs that weren't meant for the 530e as I don't want the saggy rear..

[X5Guy]

Originally Posted by AD51YYY

Hi there, I am considering purchasing the H&R 28721-5, the ones specific for the 530e..what were your thoughts on this spring? What do you mean when you say jumpy? I can't budget for coilovers and really don't want to go for springs that weren't meant for the 530e as I don't want the saggy rear..

Like the others have said…the ride is terrible. After a week of settling, the front was very low. Front wheels looked tucked and cambered in too much. I felt Iike I was driving a slammed civic like back in high school lol. Couldn't take it anymore and removed the springs. Currently sitting at factory height with the huge wheel gap but I'd rather the wheel gap than the horrible ride with H&R springs.