[slowevoviii]

I have an airbag and seat belt light on, there is a code for the BST but the car starts. I thought the car will not start if that pyro fuse is blown. Anybody had this issue? I've searched but most are saying their car will not start with it blown.

[Red_Bean_Bun]

Check the cable near the battery if it’s disconnected or torn. It causes the airbag fault to light up ...

[smass]

Your pyro fuse is not blown. It is just not sensed by the airbag computer thus the code. Check the 2 small wires going to it.

[Mpaula]

Originally Posted by Red_Bean_Bun

Check the cable near the battery if it’s disconnected or torn. It causes the airbag fault to light up ...

+1

[slowevoviii]

I'll double check the wires and clear to see if it goes away. IIRC last time I checked i wires were still in tact.

[slowevoviii]

Problem solved, guess it was a loose connection there somewhere.. I cleared the code and drove it, hasn't come back on yet. I did read there is something wrong with the BST tabs on this forum, so it was probably the tabs.