[SamK_99]

Today I changed out the factory yellow fog lights for LED lights. I knew they would set off a warning as LEDs draw considerably less power than the stock halogens, however I thought I would just be able to reset the warning from the dash. No joy. After some research I've found that it's something that can only be reset with an OBDII reader.

Before I fork out and buy a BMW specific OBDII reader to clear the code, does anyone have any experience with this and know how to reset the error without a reader?

Also on a side note, which OBDII reader would you recommend?

Thanks.

[Leucosticte]

you need to use ncsexpert and code out the warning

[nsjames]

Originally Posted by kakapo

you need to use ncsexpert and code out the warning

this.

it's either that or wire in resistors.

the errors will not stay away, the car checks the bulbs all the time.