04-06-2021, 07:27 PM | #1 |
Enlisted Member
13
Rep 29
Posts |
Lowering springs issue?
Question, Just installed Eibach Pro lowering springs(1 inch front .8 back) on stock Dampers with Vorschlag camber plates. I have the springs installed, and at full "droop" (wheel unloaded off the ground) the springs don't sit in the upper perch, and are more or less floating around. Obviously this amount of droop is very rare, when driving...and i won't be jumping the car obviously, but should i be concerned at the track?
Last edited by SquamM2C; 04-06-2021 at 10:04 PM.. |
04-07-2021, 04:29 PM | #3 |
Enlisted Member
13
Rep 29
Posts |
Yea, so still waiting for Eibach to get back to me, but Vorschlag said this is common with lowering springs, and that amount of gap isn't an issue. Still don't like it, but going to see how it works.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|