CF Parts

[cfcreations]

One of my friends Picked up a 135i and I got to test drive that bad boy. Let me tell ya I love it. Ok back to subject on hand. I make CF parts. I have never made it on a large scale just little things Like Wings, Lips, ect. Now if anyone is interested in this I am willing to make some parts and accessories for this car. Just let me know what you guys would want. I do Carbon Fiber and Carbon Kevlar. Post pics of things you would want CF. I Can't Do Hoods. Tryed once came out in compleate dissaster.

Ill see if I can post pics of my 335xi with my Carbon Kevlar parts

[InsaneSkippy]

Well, you're going to have some stiff competition. BMW is offering a bunch of OEM carbon fiber parts.

[cfcreations]

yeah i just saw a post on that. also i think of put this is the wrong section if i did can someone move it for me please

[Robert]

Depends on the price. How much do you think it will cost for the interior door handle bar, the dash trim and the trim around the shifter.

The BMW OEM trims are expensive but if your price point is right you will be able to sell. I would certainly be interested in those items above but not at bmw's price.

[cfcreations]

well when i get started (when my buddy will let me dismantle his car) I will get started. OEM trims are pretty easy and cheep to make so yeah they should be cheeper by far. The hard stuff is the exterior. If someone wants to allow me to take apart there car Free Stuff Will be in there neer future

[zbladejr]

cfcreations, your idea and approach are great. Make good quality proper fit cf accessories for a price that equals value. Most here are enthusiasts, not necessarly wealthy. If we go with non BMW accessories, then it's for price. My suggestion is to draw up a 'brochure' that might indicate the parts you'd offer and a general price range or price point that they could be. I will have a black on black 135i and a little cf detailing would be really hot - if I can afford it. Thanks for reaching out to us.

[Papethova]

For me it depends on the CF weave. I like a small tight weave and I like a dark color. Can you post pics of samples?

[Italteen3]

Originally Posted by Papethova

For me it depends on the CF weave. I like a small tight weave and I like a dark color. Can you post pics of samples?

+1 but fitment is also key! How about the paddles in CF

[WhiteOne]

Maybe you could make the shifter surround with a coin tray angled with the dash instead of under it. Just a thought...

[Russo]

i'm interested

[aus]

Performance lip spoiler please.

[cfcreations]

Originally Posted by Papethova

For me it depends on the CF weave. I like a small tight weave and I like a dark color. Can you post pics of samples?

The Carbon Fiber I use is a dark color. I can do dry CF and Wet CF. The Carbon Kevlar has a yellow weave in it. you can also get it in different colors like Red, Bue, So on and so forth. I want to start making things within the next few months. As for pics I have no camera right now I dont know where I put it

[cfcreations]

Originally Posted by Italteen3

+1 but fitment is also key! How about the paddles in CF

I am attempting to make the paddles in CF for my 335xi

[cfcreations]

Originally Posted by aus

Performance lip spoiler please.

Thats on a list i have going on

[Papethova]

Im interested in a rear spoiler like the Tii, a rear diffuser (the Tii one is ok but id like something more radical), front splitters, possibly mirrors, interior trim, and a ROOF with the fin in CF too.

Im looking for eyelids too but Id paint those AW along with side skirts. Possibly a roof spoiler (CF with a CF roof or AW with an AW roof).

When you find your camera post some pics because the weave is most important to me. Someone mentioned fitment, but I am assuming the fitment is FLAWLESS. Id never purchase anything that didnt fit perfectly. Ive seen some black CF that looks silverish and I prefer it on the dark side.

[cfcreations]

The fitment if i had the car i would make sure its 100% or close to it. Try and make if factory looking is my motto.

[Papethova]

Originally Posted by cfcreations

The fitment if i had the car i would make sure its 100% or close to it. Try and make if factory looking is my motto.

:headbang:

[mateo]

^^ I agree.

[cfcreations]

Well I just got word that I may be getting a 135i to play with. Well accually its a friend of mine. He going to get one some time over the summer or around his birthday. He is a little bit better with me in Fiberglass/Carbon Fiber laying. So were going to team up and start as soon as we can get are hands on one.

[rocketpop]

I would be interested in front splitter since the BMW ones won't fit the stock 135i bumper

[Italteen3]

Originally Posted by cfcreations

Well I just got word that I may be getting a 135i to play with. Well accually its a friend of mine. He going to get one some time over the summer or around his birthday. He is a little bit better with me in Fiberglass/Carbon Fiber laying. So were going to team up and start as soon as we can get are hands on one.

SUMMER! Oh man! Well atleast I will have had the car for a while. Though if you get CF paddles done right, the wait will be well worth it and you can put me on the top of the list for that one!!!

How about CF gas cap?

So many ideas stirring up in my head.

[cfcreations]

Originally Posted by Italteen3

SUMMER! Oh man! Well atleast I will have had the car for a while. Though if you get CF paddles done right, the wait will be well worth it and you can put me on the top of the list for that one!!!

How about CF gas cap?

So many ideas stirring up in my head.

There are alot of ideas in my head also. I just need to put em down on paper. We are looking to do a front splitter for both the 135i and 125i. But we are going to compile a list of things that we are going to be makeing and I have found my camera I just need Batterys Lol.