FS: McKinney Oil Catch Can W/ Custom Mount Kit (Ready To Be Installed)

hl0m4n · 11-07-2009, 06:58 PM

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

up for sale is a 1/2" 90 degree fitting mckinney racework oil cath can with a custom mount kit making this can ready to be installed (as you guys know, there is no mount kit that comes with the can and we have to make our own, you can search and check out what some people did but this is by far the best solution).

the 1/2" tubing is better then the 3/8" that other catch cans use because it is closer to oem spec tubing (at least to me anyway

).

this is a project my friend never got to completing and his lease is up like mine in a few. the oil catch can itself is brand new never used along with the mount kit and adapters so everything here is brand new never used.

What You Get:
1. 1/2 " 90 Degree Brand New McKinney Oil Catch Can ($133 + shipping new from their site: http://www.mckinneyraceworks.com/cat...products_id=80)
2. Riss Racing Mount Kit (Same mount kit you get with their can, so you know it fits

).
3. x1 1" to 1/2" adapter
4. x1 3/4" to 1/2" adapter

Note: the adapters are 1 piece not x2 like the riss racing which ensures you no oil leakage from eldon james which supply auto companies with these types of pieces and adapters along with hoses, etc.

What You Need To Do:
when you get the package all you have to do is weld the riss racing "L" bracket onto the can itself. after that use the other part of the riss racing mount kit and your good to go.

you need to go to lowes, home depot, etc and buy x2 long pieces of 1/2" tubing, a short piece of 1" and a short piece of 3/4" and a few clamps (less then $20 total).

put the pieces together and your solid.

Price: Asking $115 (includes 3% paypal fee and shipping). because my friend never got around to installing it or started the project i can't guarentee any fitments, issues, etc. buyer takes full responsability on how the project goes, im just providing the basic tools and general idea of it.

Darkcyd_Turbo · 11-07-2009, 07:29 PM

Give me your Paypal addy...I'll take it! PM sent.

._. · 11-07-2009, 07:39 PM

about 9 minutes too late... sent a PM earlier.

john boxter · 11-07-2009, 11:12 PM

is this better or the riss racing

Darkcyd_Turbo · 11-07-2009, 11:35 PM

Hey bro I'll paypal you tomorrow for sure! Thanks!!!! I've been meaning to get this done to the car before I install my stett charge pipe and ams fmic! PM'd you back, just let me know about shipping.

11-07-2009, 06:58 PM	#1
hl0m4n Major General 2159 Rep 5,623 Posts Drives: BMW Join Date: Nov 2006 Location: NY iTrader: (58)	FS: McKinney Oil Catch Can W/ Custom Mount Kit (Ready To Be Installed) BIMMERPOST / Classifieds Asking Price: None Item Interest up for sale is a 1/2" 90 degree fitting mckinney racework oil cath can with a custom mount kit making this can ready to be installed (as you guys know, there is no mount kit that comes with the can and we have to make our own, you can search and check out what some people did but this is by far the best solution). the 1/2" tubing is better then the 3/8" that other catch cans use because it is closer to oem spec tubing (at least to me anyway ). this is a project my friend never got to completing and his lease is up like mine in a few. the oil catch can itself is brand new never used along with the mount kit and adapters so everything here is brand new never used. What You Get: 1. 1/2 " 90 Degree Brand New McKinney Oil Catch Can ($133 + shipping new from their site: http://www.mckinneyraceworks.com/cat...products_id=80) 2. Riss Racing Mount Kit (Same mount kit you get with their can, so you know it fits ). 3. x1 1" to 1/2" adapter 4. x1 3/4" to 1/2" adapter Note: the adapters are 1 piece not x2 like the riss racing which ensures you no oil leakage from eldon james which supply auto companies with these types of pieces and adapters along with hoses, etc. What You Need To Do: when you get the package all you have to do is weld the riss racing "L" bracket onto the can itself. after that use the other part of the riss racing mount kit and your good to go. you need to go to lowes, home depot, etc and buy x2 long pieces of 1/2" tubing, a short piece of 1" and a short piece of 3/4" and a few clamps (less then $20 total). put the pieces together and your solid. Price: Asking $115 (includes 3% paypal fee and shipping). because my friend never got around to installing it or started the project i can't guarentee any fitments, issues, etc. buyer takes full responsability on how the project goes, im just providing the basic tools and general idea of it. Attached Images __________________ Cars: 07 335i ► 08 328i ► 11 328xi ► 13 M3 ► 17 M4 ► 14 M6 Last edited by hl0m4n; 11-08-2009 at 12:11 AM..
	Appreciate 0 Tweet Quote

11-07-2009, 07:29 PM	#2
Darkcyd_Turbo "Booty Hole Bandit" 32 Rep 1,597 Posts Drives: 2008 Montego E92 335xi Join Date: Apr 2009 Location: Madison, WI iTrader: (14)	Give me your Paypal addy...I'll take it! PM sent.
	Appreciate 0 Quote

11-07-2009, 07:39 PM	#3
._. Colonel 74 Rep 2,353 Posts Drives: BMW Join Date: Jun 2009 Location: Miami iTrader: (15)	about 9 minutes too late... sent a PM earlier.
	Appreciate 0 Quote

11-07-2009, 11:12 PM	#4
john boxter Captain 35 Rep 763 Posts Drives: 2008 e93 Join Date: Sep 2009 Location: long Island New York iTrader: (3)	is this better or the riss racing
	Appreciate 0 Quote

11-07-2009, 11:35 PM	#5
Darkcyd_Turbo "Booty Hole Bandit" 32 Rep 1,597 Posts Drives: 2008 Montego E92 335xi Join Date: Apr 2009 Location: Madison, WI iTrader: (14)	Hey bro I'll paypal you tomorrow for sure! Thanks!!!! I've been meaning to get this done to the car before I install my stett charge pipe and ams fmic! PM'd you back, just let me know about shipping.
	Appreciate 0 Quote