In need of help with my offset?!?

slowmkv001 · 09-15-2010, 10:19 AM

Okay so i have a set of csl reps the offset in the rear is 40 and its a 10inch wheels. So that would mean i wouldn need a 5mm spacer to get it to fit on my 335i? Or should i go with a 10mm?

remmib · 09-15-2010, 01:15 PM

Can't see why it shouldn't fit without spacers.

ModBargains.com · 09-15-2010, 01:54 PM

If you got the VMR VB3 CSL the setup that would work is the 19x8.5 ET40 in the front and 19x10 ET38 in the rear. You should be fine if you have an ET40 in the rear with another wheel brand.

- Alan

slowmkv001 · 09-15-2010, 02:34 PM

I went ahead and ordered a 10mm spacer, hopefully i dont rub.

enrita · 09-15-2010, 04:47 PM

if you have an e92 you will rub with spacers. e90 should be ok.

VMRWheels · 09-15-2010, 05:25 PM

Quote:

Originally Posted by slowmkv001

I went ahead and ordered a 10mm spacer, hopefully i dont rub.

Our VB3 in 19x10 +38 is fairly flush already... You could probably push them out another 5mm without a problem. 10mm may require fender rolling.

-Charles@VMRWheels

slowmkv001 · 09-15-2010, 07:03 PM

Its a e92, and truthfully I don't think there vmr. My buddy had them sitting in his garage and has no clue what brand they are. He had them on his e90 328i 4 door and they were rubbing like crazy on the inside of the tire. I didn't get a chance to measure them and there getting painted now, so I'm not too sure if there a 9.5 or 10 in the rear but on the wheel it says 40 on the inside so I'm taking it that its a et40.

remmib · 09-16-2010, 11:36 AM

Quote:

Originally Posted by slowmkv001

Its a e92, and truthfully I don't think there vmr. My buddy had them sitting in his garage and has no clue what brand they are. He had them on his e90 328i 4 door and they were rubbing like crazy on the inside of the tire. I didn't get a chance to measure them and there getting painted now, so I'm not too sure if there a 9.5 or 10 in the rear but on the wheel it says 40 on the inside so I'm taking it that its a et40.

That's weird, because I remember seeing e90 in here some time ago with 19x10.5 ET40 LM reps.

VMRWheels · 09-16-2010, 03:00 PM

Quote:

Originally Posted by slowmkv001

Its a e92, and truthfully I don't think there vmr. My buddy had them sitting in his garage and has no clue what brand they are. He had them on his e90 328i 4 door and they were rubbing like crazy on the inside of the tire. I didn't get a chance to measure them and there getting painted now, so I'm not too sure if there a 9.5 or 10 in the rear but on the wheel it says 40 on the inside so I'm taking it that its a et40.

Hmm... Our wheels would either have a +25 or a +38 in the rear for our 10" VB3's and either +22, 33, 45 for our 9.5" fitments.

If you could take some photos, it would help.

-Charles@VMRWheels

09-15-2010, 10:19 AM	#1
slowmkv001 New Member 0 Rep 11 Posts Drives: 2008 BMW 335i Join Date: Sep 2010 Location: NJ iTrader: (0)	In need of help with my offset?!? Okay so i have a set of csl reps the offset in the rear is 40 and its a 10inch wheels. So that would mean i wouldn need a 5mm spacer to get it to fit on my 335i? Or should i go with a 10mm?
	Appreciate 0 Tweet Quote

09-15-2010, 01:15 PM	#2
remmib General 1569 Rep 29,202 Posts Drives: 2013 F10 520d M-Sport Join Date: Feb 2006 Location: Norway iTrader: (0)	Can't see why it shouldn't fit without spacers. __________________ F10 520d M-Sport Alpine White \| HRE P43SC 20x9+20x11 \| Michelin PSS 255/35+295/30 \| KW V3 Coilover \| M5 Front Sway Bar + M550d Rear Sway Bar \| 3DDesign Front Lip \| BMW M Performance CF Spoiler \| BMW M Performance Diffuser \| BMW M Performance Black Grills \| BMW M Performance Pedals \|
	Appreciate 0 Quote

09-15-2010, 01:54 PM	#3
ModBargains.com Banned 475 Rep 13,583 Posts Drives: JB E92 335i Join Date: Feb 2008 Location: 1721 E. Lambert Rd #C, La Habra, CA 90631 iTrader: (51)	If you got the VMR VB3 CSL the setup that would work is the 19x8.5 ET40 in the front and 19x10 ET38 in the rear. You should be fine if you have an ET40 in the rear with another wheel brand. - Alan
	Appreciate 0 Quote

09-15-2010, 02:34 PM	#4
slowmkv001 New Member 0 Rep 11 Posts Drives: 2008 BMW 335i Join Date: Sep 2010 Location: NJ iTrader: (0)	I went ahead and ordered a 10mm spacer, hopefully i dont rub.
	Appreciate 0 Quote

09-15-2010, 04:47 PM	#5
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	if you have an e92 you will rub with spacers. e90 should be ok. __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

09-15-2010, 07:03 PM	#7
slowmkv001 New Member 0 Rep 11 Posts Drives: 2008 BMW 335i Join Date: Sep 2010 Location: NJ iTrader: (0)	Its a e92, and truthfully I don't think there vmr. My buddy had them sitting in his garage and has no clue what brand they are. He had them on his e90 328i 4 door and they were rubbing like crazy on the inside of the tire. I didn't get a chance to measure them and there getting painted now, so I'm not too sure if there a 9.5 or 10 in the rear but on the wheel it says 40 on the inside so I'm taking it that its a et40. Last edited by slowmkv001; 09-15-2010 at 07:19 PM..
	Appreciate 0 Quote