Tire Pressure Idiot Light

lowonthetotem · 10-05-2010, 08:44 AM

I looked through the first few pages of this forum and did not see anything on resetting this indicator. I had a tire with a slow leak and left this light on for a while until I got new tires on the rear. Now that the new tires are on, I've tried resetting the flat tire warning light. I've used both a code restter and the dashboard computer. The weird thing is that when the engine is off and the battery is on, my "Check Control" reads "Check OK." However, when the engine is on, I get the flat tire indicator. When I rest the indicator with the engine off, I got "CC ID 63." Any ideas?

Tom K. · 10-05-2010, 10:10 AM

Are you resetting the TPM with the engine idling & the car stopped as it says in the manual? On my '07, this method works and the actual reset occurs soon after you then start driving.

Tom

Couch · 10-05-2010, 12:53 PM

Quote:

Originally Posted by Tom K.

Are you resetting the TPM with the engine idling & the car stopped as it says in the manual? On my '07, this method works and the actual reset occurs soon after you then start driving.

Tom

This.

Mine came on yesterday due to the temp change and I had to reset it. The yellow light doesn't go off until you start driving.

Gavin@MMW · 10-05-2010, 01:34 PM

Did you use the stalk reset? and then a "check" mark came up?

Couch · 10-06-2010, 11:41 AM

Quote:

Originally Posted by Craven 328

Did you use the stalk reset? and then a "check" mark came up?

Yes.

If I remember correctly, the check mark shows up and then the little clock ticker animates and then disappears and the 'Clock and Mileage' display comes back up, the yellow light was still on. I drove about 2 miles and then it went away.

10-05-2010, 08:44 AM	#1
lowonthetotem New Member 0 Rep 8 Posts Drives: 2006 325i E90 Join Date: Sep 2010 Location: Cape Coral, FL iTrader: (0)	Tire Pressure Idiot Light I looked through the first few pages of this forum and did not see anything on resetting this indicator. I had a tire with a slow leak and left this light on for a while until I got new tires on the rear. Now that the new tires are on, I've tried resetting the flat tire warning light. I've used both a code restter and the dashboard computer. The weird thing is that when the engine is off and the battery is on, my "Check Control" reads "Check OK." However, when the engine is on, I get the flat tire indicator. When I rest the indicator with the engine off, I got "CC ID 63." Any ideas?
	Appreciate 0 Tweet Quote

10-05-2010, 10:10 AM	#2
Tom K. Major General 124 Rep 5,627 Posts Drives: '07 328iT, '13 Boxster Join Date: Mar 2008 Location: Maryland iTrader: (0)	Are you resetting the TPM with the engine idling & the car stopped as it says in the manual? On my '07, this method works and the actual reset occurs soon after you then start driving. Tom
	Appreciate 0 Quote

10-05-2010, 01:34 PM	#4
Gavin@MMW Brigadier General 406 Rep 3,879 Posts Drives: MMW Supercharged E90 328i Join Date: Nov 2009 Location: 818/805 iTrader: (18)	Did you use the stalk reset? and then a "check" mark came up?
	Appreciate 0 Quote