[henrik_rexten]

Anyone have clearance details about wheel fitment with coilovers.

I am running 9x20 et35, and don’t know if it will rub against the spring.
Maybe some have pictures.

Thanks.

[Trevendous03]

Originally Posted by henrik_rexten

Anyone have clearance details about wheel fitment with coilovers.

I am running 9x20 et35, and don’t know if it will rub against the spring.
Maybe some have pictures.

Thanks.

20x9 front?? The only issue is in the front... if you have 20x9 +35 front, of course they're gonna rub the suspension. 8.5" width in the front with +35 is cutting it very close, and 9" width +35 gives you 6mm less inner clearance.

You may be fine with coilovers without helper springs by the way.

[remmib]

Originally Posted by henrik_rexten

Anyone have clearance details about wheel fitment with coilovers.

I am running 9x20 et35, and don’t know if it will rub against the spring.
Maybe some have pictures.

Thanks.

But aren't you already running 20x9 ET35 in the front?

I've got KW v2 and I've measured my 20x8.5 to approx. ET43 (+/-1mm I guess), and they just cleared on the insideby about 1mm. I've put on 10mm spacers though.
So 9" wide ET35 should be okay.

[henrik_rexten]

Originally Posted by remmib

But aren't you already running 20x9 ET35 in the front?

I've got KW v2 and I've measured my 20x8.5 to approx. ET43 (+/-1mm I guess), and they just cleared on the insideby about 1mm. I've put on 10mm spacers though.
So 9" wide ET35 should be okay.

Thanks. I had only lowering springs last year. I also had bilsteins on the red one. 8,5 et 40. But culd not remember if the spring was so low that it was lower than the wheel.