[jusbechillin]

So I got procede and installed it today....It doesnt feel much differant or maybe I was expecting too much.. everyone says when you gas it with dtc off completley(hold button) that you just spin through 1-2 gears... well I do a little in first.... so I decided to check the governer....nope...car stops at 150 still.... The car runs fine.... Seems to stutter a little between shifts.... anyone have any ideas?

[OpenFlash]

Originally Posted by jusbechillin

So I got procede and installed it today....It doesnt feel much differant or maybe I was expecting too much.. everyone says when you gas it with dtc off completley(hold button) that you just spin through 1-2 gears... well I do a little in first.... so I decided to check the governer....nope...car stops at 150 still.... The car runs fine.... Seems to stutter a little between shifts.... anyone have any ideas?

Are you sure you are running on 91oct? And that no one else, who also drives your car, might have filled up with lower octane? I've seen it before. There should be no stutters between shifts. And power gains should be quite obvious.

Probably best if you post up questions on our tech support forum. You'll get a quicker response there. As well as input from many others who have installed the kit. Here: http://216.120.252.228/forum/index.php

Also, I'd lay off the top speed runs until you are sure it is running correctly.

shiv

[teknochild]

or maybe he didnt even install it right in the first place...

i love how you just decided to "test" the top speed like its nothing though O_o