HID Fog Error Canceler...

hiter202 · 10-14-2011, 01:43 PM

Hey guys,

I was on DDMTuning since that is the site i used most oftenly to order HID kits for my previous vehicle and no issue with the HIDs at all and lifetime warranty.

I want to get a set of HIDs for the fogs, 10000k to be exact in order to match the LCI angel eyes.

Can someone please tell me what I need to cancel the errors/flicker of the fogs. I know there was an error canceler that some people used, but not sure what it was.

Please help

Jeff@TopGearSolutions · 10-14-2011, 02:28 PM

http://www.highperformancebulbs.com/ercowaca.html

They also sell a kit that works error free on this car in the BMW section.

hiter202 · 10-14-2011, 02:33 PM

Well i already have the HIDs from DDM Tuning, i just need to purchase the 10000k bulbs from them because the bulbs I have are not H8.

the error cancelers that are in the link posted above, they work good? The HIDs will work fine without flickering or anything?

Jeff@TopGearSolutions · 10-14-2011, 02:34 PM

Quote:

Originally Posted by elitefusion

Well i already have the HIDs from DDM Tuning, i just need to purchase the 10000k bulbs from them because the bulbs I have are not H8.

the error cancelers that are in the link posted above, they work good? The HIDs will work fine without flickering or anything?

They should. Error cancelers basically create more resistance. They all work on the same principal. HPB only buys the high quality stuff. Shoot them an email if you have any questions.

bmw4lyfe · 10-29-2011, 09:03 AM

No i have the DDM lights in my fogs and they work for a bit and then turn off...you need the canceller thats what i have but i got lazy and didnt put them on yet lol...

turbocomppro · 10-29-2011, 12:06 PM

Is it possible to code it out instead?

Lolitskasey · 10-29-2011, 12:11 PM

If you got the 55 watts they won't work plain and simple. But if you have the 35 watts you can either try the code eliminators (which didn't work for me) or you can try splicing in two 4700uf resistors from radio shack (which works flawless) I say try the resistors first cheap and fast.

Cuba · 10-29-2011, 05:20 PM

I just soldered in my own capacitor about 5 bucks each from RadioShack. There's a DIY I think it's called like hid's as easy as 60.95 or something like that

turbocomppro · 10-29-2011, 08:34 PM

Wait.. One says to use resistor, one says capacitor. Which is it? And do I do it in series or in parallel?

10-14-2011, 01:43 PM	#1
hiter202 Captain 35 Rep 733 Posts Drives: BMW Join Date: Jul 2011 Location: CT iTrader: (6)	HID Fog Error Canceler... Hey guys, I was on DDMTuning since that is the site i used most oftenly to order HID kits for my previous vehicle and no issue with the HIDs at all and lifetime warranty. I want to get a set of HIDs for the fogs, 10000k to be exact in order to match the LCI angel eyes. Can someone please tell me what I need to cancel the errors/flicker of the fogs. I know there was an error canceler that some people used, but not sure what it was. Please help
	Appreciate 0 Tweet Quote

10-14-2011, 02:28 PM	#2
Jeff@TopGearSolutions 3441 Rep 79,211 Posts Drives: C6 Z06, 09 335i, 10 335xi Join Date: Dec 2008 Location: www.TopGearSolutions.com iTrader: (37)	http://www.highperformancebulbs.com/ercowaca.html They also sell a kit that works error free on this car in the BMW section.
	Appreciate 0 Quote

10-14-2011, 02:33 PM	#3
hiter202 Captain 35 Rep 733 Posts Drives: BMW Join Date: Jul 2011 Location: CT iTrader: (6)	Well i already have the HIDs from DDM Tuning, i just need to purchase the 10000k bulbs from them because the bulbs I have are not H8. the error cancelers that are in the link posted above, they work good? The HIDs will work fine without flickering or anything?
	Appreciate 0 Quote

10-29-2011, 09:03 AM	#5
bmw4lyfe Enlisted Member 2 Rep 40 Posts Drives: '07 E92 335i Join Date: Oct 2011 Location: Philadelphia iTrader: (0)	No i have the DDM lights in my fogs and they work for a bit and then turn off...you need the canceller thats what i have but i got lazy and didnt put them on yet lol...
	Appreciate 0 Quote

10-29-2011, 12:06 PM	#6
turbocomppro First Lieutenant 59 Rep 305 Posts Drives: 2022 M340i Join Date: Oct 2009 Location: El Monte, CA iTrader: (0)	Is it possible to code it out instead?
	Appreciate 0 Quote

10-29-2011, 12:11 PM	#7
Lolitskasey Private First Class 11 Rep 115 Posts Drives: 2006 Black 325xi Join Date: Aug 2011 Location: Alaska iTrader: (0)	If you got the 55 watts they won't work plain and simple. But if you have the 35 watts you can either try the code eliminators (which didn't work for me) or you can try splicing in two 4700uf resistors from radio shack (which works flawless) I say try the resistors first cheap and fast.
	Appreciate 0 Quote

10-29-2011, 05:20 PM	#8
Cuba Cuba 81 Rep 1,676 Posts Drives: 07 328xi Join Date: Jul 2010 Location: PA iTrader: (12)	I just soldered in my own capacitor about 5 bucks each from RadioShack. There's a DIY I think it's called like hid's as easy as 60.95 or something like that __________________ 07 328xi Monaco Blue\|Premium\|Cold\|Navi\|CA\|LLumar\|Mtec\|DDM\|aFe\|Ambe r-Gone\|Rear Fogs\|Bimmian\|PY-Speed\|OEM\|e92-lighting\|V1\|BavAuto\|Weisslicht\|Cyba\|Beyern\|Falken\| Sonic Tuning\|ECS Tuning\|JL Audio\|Rockford Fosgate
	Appreciate 0 Quote

10-29-2011, 08:34 PM	#9
turbocomppro First Lieutenant 59 Rep 305 Posts Drives: 2022 M340i Join Date: Oct 2009 Location: El Monte, CA iTrader: (0)	Wait.. One says to use resistor, one says capacitor. Which is it? And do I do it in series or in parallel?
	Appreciate 0 Quote