[trinijay]

i was able to access my nfrm before but after installing the lci rear lights on a e92 i get a error


>> ERROR! Modul: COAPI.CPP, Proc: coapiSetFswPswAscii, LineNr: 07, ErrorNr: 1000
OSFG_MSA_NO_KL15_AUTO_OFF, nicht_aktiv
ERROR! Modul: SW_ARRAY.C, ProcNr: 07, LineNr: 01, ErrorNr: 43.

>> ERROR! Modul: COAPI.CPP, Proc: coapiSetFswPswAscii, LineNr: 07, ErrorNr: 1000
TC_KL15_AUTO_OFF_OSFG, nicht_aktiv
ERROR! Modul: SW_ARRAY.C, ProcNr: 07, LineNr: 01, ErrorNr: 43.

>> ERROR! Modul: COAPI.CPP, Proc: coapiSetFswPswAscii, LineNr: 07, ErrorNr: 1000
TC_NOT_P_NO_KL15_AUTO_OFF, nicht_aktiv
ERROR! Modul: SW_ARRAY.C, ProcNr: 07, LineNr: 01, ErrorNr: 43.

>> ERROR! Modul: COAPI.CPP, Proc: coapiSetFswPswAscii, LineNr: 07, ErrorNr: 1000
TIME_KL15_AUT_OFF_DR_OPEN, wert_01
ERROR! Modul: SW_ARRAY.C, ProcNr: 07, LineNr: 01, ErrorNr: 43.

>> ERROR! Modul: COAPI.CPP, Proc: coapiSetFswPswAscii, LineNr: 07, ErrorNr: 1000
HK_V_VER_MODUS, modus_00
ERROR! Modul: SW_ARRAY.C, ProcNr: 07, LineNr: 01, ErrorNr: 43.

>> ERROR! Modul: COAPI.CPP, Proc: coapiSetFswPswAscii, LineNr: 07, ErrorNr: 1000
TC_MSA_IGNORE_ENG_RUN, nicht_aktiv

>> ERROR! Modul: LFCDHDIA.CPP (A_PL2FRX.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
BIP-0009: BEST VERSION ERROR

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERDATEN_LESEN


would welcome some help

i even updated to version 46

thanks

[trinijay]

i can access other modules fine and code them such as kombi

error again only when trying to read nfrm

ERROR! Modul: LFCDHDIA.CPP (A_PL2FRX.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
COAPI-2000: EDIABAS or SGBD error
BIP-0009: BEST VERSION ERROR

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERINDEX_LESEN

>> ERROR! Modul: COAPI.CPP, Proc: coapiReadCodierIndexFromSg, LineNr: 05, ErrorNr: 2000
CODIERINDEX_LESEN: A_PL2FRX

>> ERROR! Modul: LFCDHDIA.CPP (A_PL2FRX.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
BIP-0009: BEST VERSION ERROR

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERDATEN_LESEN

[trinijay]

solved it

i had updated my daten files which i think cause the error

what i did to resolve it ....noted down the 3 files ncs uses to read the nfrm module and roll them back to a previous version

[makkan00]

Originally Posted by trinijay

solved it

i had updated my daten files which i think cause the error

what i did to resolve it ....noted down the 3 files ncs uses to read the nfrm module and roll them back to a previous version

So you were already on V46 and you had to go to previous files to get it coded?

And which version of files did you use to get it coded?

[neilvosko]

You have to update EDIABAS to latest version to match the updated daten files

[Edmond357]

which data are you using?
v46.2?
Start the LADEN.BAT
and copy SGDAT to NCSEXPET/SGDAT
and ECU to EDIABAS/ECUf

[makkan00]

I am trying to update FRM---> FRM2 into a car. After adding VO to new FRM2, when I try to read FRM2 (NFRM), I get error as tinijay had


ROR! Modul: LFCDHDIA.CPP (A_PL2FRX.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
COAPI-2000: EDIABAS or SGBD error
BIP-0009: BEST VERSION ERROR

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERINDEX_LESEN

>> ERROR! Modul: COAPI.CPP, Proc: coapiReadCodierIndexFromSg, LineNr: 05, ErrorNr: 2000
CODIERINDEX_LESEN: A_PL2FRX

>> ERROR! Modul: LFCDHDIA.CPP (A_PL2FRX.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
BIP-0009: BEST VERSION ERROR

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERDATEN_LESEN



I have back dated A_PL2FRX.IPS/IPO to earlier daten file (currently V46) but no avail.

When I try to read NFRM, it uses these three files


FRM2_E89.C08
A_PL2FRX.IPO
FRM_70.PRG

Any suggestions?

[nasserkarbassi]

Dear friends,
I had the same problem when trying to read NFRM from 3 series. I noticed that FRM2_89.C08 is only about 2 KB in size and actually it is empty of codes. It is interesting, please check and confirm.
thanks. nasserkarbassi@yahoo.com

[doogee]

Originally Posted by nasserkarbassi

Dear friends,
I had the same problem when trying to read NFRM from 3 series. I noticed that FRM2_89.C08 is only about 2 KB in size and actually it is empty of codes. It is interesting, please check and confirm.
thanks. nasserkarbassi@yahoo.com

I noticed the same thing! Still no luck reading it.