[Yvette]

ok guys, this is very frustrating.
i was looking into internet trying to find updated INPA program to clear codes air bag light.
i did download some files from a thread in e90post but did not work.
anyways, i did not code anything
i only wiggled with inpa, and new inpa i downloaded.
i also tried bmwloggers program but did not get any codes from there too
i gave up, took my cable out,
started car. now all the error comes on, rpm shifts from 1-3 rapidly,
what could be wrong? i mean i did not code anythin tho

[Yvette]

1 possibility cause is after i coded ( i actually coded in the morning today but did not bother to turn the car on afterward) i might not have pressed F3 button which is execute the job before closing ncs.

[cn555ic]

Best bet is take the negative terminal off the battery for 15 minutes and then Put it back and start the car. Let the dme reset itself. See if that works.

[Yvette]

Originally Posted by cn555ic

Best bet is take the negative terminal off the battery for 15 minutes and then Put it back and start the car. Let the dme reset itself. See if that works.

i will try this.

[BOBKUR]

At least you will have a boat anchor.

[Yvette]

resetting battery did not work.
any other options?

[cn555ic]

What module were actually viewing when u think you accidentally press execute job and closed NCS?

[Yvette]

Originally Posted by cn555ic

What module were actually viewing when u think you accidentally press execute job and closed NCS?

it was ABG module,
I am 99% sure I did not pressed execute job before closing NCS.

[Yvette]

now I can't open up NCS software... I deleted them and tried install again, but still no luck.
error pop up. I really need some help here, I need to use the car.....

[Elliott@DetailAddict]

Were you in INPA or NCS?
You need fresh installs and try to reset everything to defaults.
Sounds like you may have reset adaptations.
Have you tried going for a drive?
This thread needs to be stickied as to why you should not mess with powerful programs without having a firm understanding of what you're doing.

[Joe-]

Originally Posted by e90sexion

ok guys, this is very frustrating.
i was looking into internet trying to find updated INPA program to clear codes air bag light.
i did download some files from a thread in e90post but did not work.
anyways, i did not code anything
i only wiggled with inpa, and new inpa i downloaded.
i also tried bmwloggers program but did not get any codes from there too
i gave up, took my cable out,
started car. now all the error comes on, rpm shifts from 1-3 rapidly,
what could be wrong? i mean i did not code anythin tho

try this

http://www.e90post.com/forums/showpo...&postcount=136

I got the fluctuating idle and CEL. I shut it off, then left my foot off the clutch and pressed the start button and held the gas pedal to the floor for about 10 seconds.

[Yvette]

Originally Posted by Grant@DetailAddict

Were you in INPA or NCS?
You need fresh installs and try to reset everything to defaults.
Sounds like you may have reset adaptations.
Have you tried going for a drive?
This thread needs to be stickied as to why you should not mess with powerful programs without having a firm understanding of what you're doing.

Hi Grant,
the problem is, I am confused right now.
With NCS, I am 99% sure I did not click F3 execute job button when close NCS.
With INPA, I downloaded multiple INPA program and ran it with cable hooked up. diagnose was failed, but I do not think I did something there. All I did tried was going to kaser > airbag > tried to retrieve code that's all, but error box kept came up.
Could you briefly explain how to reset everything?
I do have my original file.
*As of right now, I am working to fresh install NCS again, but new error box keep come up about win32.dll and such and such, I will figure this out and let you guys updated. I don't think I can sleep.

[Yvette]

Originally Posted by Joe-

try this

http://www.e90post.com/forums/showpo...&postcount=136

RPM shift 1-3 rapidly and its not just rpm. Car accelates itself while doing that, so I can't even drive it.

[Yvette]

Originally Posted by Joe-

try this

http://www.e90post.com/forums/showpo...&postcount=136

omg! it worked! now no more rpm shifting no 4x4 light error.
*Only error I have now is CEL, CEL do not appear in iDrive tho.
I can't get INPA or NCS work now so clearing CEL myself isn't going to work.

[rentonrider]

This probably doesn't help but to read/clear errors I do the following. Or a simple module reset would've cleared errors provided there's no faulty hardware. You must have pressed something while in inpa.. Sorry and good luck.

EDIT.. ok glad your car is working now. LOL

1 -Start INPA
2-Press F9 to select E90
3-Click Functional Jobs
4-Press Enter
5-Press F4 to select E90
6-Press F4 to select Error Memory
7-Press F1 to Read Error Memory or the F something to Clear Errors

[Yvette]

All cleared, no more CEL
I am back to with airbag light tho, but will find professional to clear this.
thanks for all the replies, it was great help Really apprecaited

[smooth1]

Originally Posted by e90sexion

omg! it worked! now no more rpm shifting no 4x4 light error.
*Only error I have now is CEL, CEL do not appear in iDrive tho.
I can't get INPA or NCS work now so clearing CEL myself isn't going to work.

So you did clear adaptations at some point?

[Yvette]

Originally Posted by smooth1

So you did clear adaptations at some point?

clear adaptations?

[Tuesday]

Originally Posted by Grant@DetailAddict

This thread needs to be stickied as to why you should not mess with powerful programs without having a firm understanding of what you're doing.

[smooth1]

Originally Posted by e90sexion

clear adaptations?

Nevermind? See the above post.

[Yvette]

Originally Posted by smooth1

Nevermind? See the above post.

the throttle adaption you mean, yeah never had clue it would worked but it did , your program also cleared the CEL, big thanks to you
is it possible for to update the program so it can clear air bag light too?

[smooth1]

No problem. Free is DME only. Other modules will require a license. I haven't released the additional module support yet.