|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
CTHBM01 install
|
|
10-10-2012, 10:26 AM | #1 |
Private
7
Rep 73
Posts |
CTHBM01 install
HI,
I have got this lead and i know depending on whether you have auto start/stop you will either need to connect the yellow lead to permanent 12v from fuse box or battery I'm interest in connecting at fuse box as i don't have auto start/stop and don't fancy running cable to the battery in the rear. Does anyone know how this yellow wire connects to the fuse box (see pic for connector on end of yellow wire) and where specifically it connects to? the attached manual is for a similar cable (without reversing sensor adaptor) and has an picture of the fuse box. is anyone able to confirm the fuse its connected to in the diagram? thanks |
10-10-2012, 11:13 AM | #3 |
Private
7
Rep 73
Posts |
ok just got off the phone from a very helpful person at dynamic sounds, who explained that the spade connector will simply just plug in to the live side of any fuse. the tricky part is selecting the right empty fuse that will give a permanent live.
any ideas |
Appreciate
0
|
Bookmarks |
|
|