Purchased a never-installed Procede from friend. Couple questions..

USCTrojan4Life · 09-04-2007, 02:56 PM

how can I check which version of software is on the system? Obviously it's not v2.0, but is there a way I can make sure it's 1.47?

Also, do you guys think I should just wait for v2.0 before installing or should i install it w/ v1.47 and then upgrade when i get the 2.0 (which i ordered today)? I don't think i'm going to be one of the guys getting the first batch, so who knows when i will get my upgrade.

Thanks for your input.

Sniz · 09-04-2007, 03:06 PM

Quote:

Originally Posted by USCTrojan4Life

how can I check which version of software is on the system? Obviously it's not v2.0, but is there a way I can make sure it's 1.47?

Also, do you guys think I should just wait for v2.0 before installing or should i install it w/ v1.47 and then upgrade when i get the 2.0 (which i ordered today)? I don't think i'm going to be one of the guys getting the first batch, so who knows when i will get my upgrade.

Thanks for your input.

should say what version is installed right on the procede unit...i think.

AlViN · 09-04-2007, 03:07 PM

install procede into ur car
download procede software into your laptop
connect procede to your laptop
voila!

rooster3.0 · 09-04-2007, 04:20 PM

there should be a paper in the same bag as the fuse jumper and coupler. this paper will tell you the version your running. You should install it asap, and get used to the new power. The car is amazing with 1.47, i can only imagine what 2.0 will be like.

gobo335i · 09-05-2007, 09:50 AM

Not to jack the thread, but I also have the 1.47 in a box and a v2.0 ordered. If I was to install this now...how do I make the thing wireless so I dont have to take the thing apart every time I want upgraded software? Is there a slick solution for this? Can I use a serial/bluetooth adapter without problems?

Another stupid question...is the PROceed software PC only? I'm a MAC based designer guy. Might need to setup a dual boot machine huh?

Thanks and good luck on your install too!

DrDomer · 09-05-2007, 10:22 AM

Quote:

Originally Posted by gobo335i

Not to jack the thread, but I also have the 1.47 in a box and a v2.0 ordered. If I was to install this now...how do I make the thing wireless so I dont have to take the thing apart every time I want upgraded software? Is there a slick solution for this? Can I use a serial/bluetooth adapter without problems?

Another stupid question...is the PROceed software PC only? I'm a MAC based designer guy. Might need to setup a dual boot machine huh?

Thanks and good luck on your install too!

Ask Eugen... He should know about the wireless stuff.

DrewKo · 09-05-2007, 11:17 AM

Quote:

Originally Posted by gobo335i

Not to jack the thread, but I also have the 1.47 in a box and a v2.0 ordered. If I was to install this now...how do I make the thing wireless so I dont have to take the thing apart every time I want upgraded software? Is there a slick solution for this? Can I use a serial/bluetooth adapter without problems?

Another stupid question...is the PROceed software PC only? I'm a MAC based designer guy. Might need to setup a dual boot machine huh?

Thanks and good luck on your install too!

Yes it is PC only. I'm a Mac user and ran the Vishnu PC software on a MacBook using Parallels to operate the Windows OS. There is a newer software like Parallels that is getting good reviews at the apple store site by the way.

roadkillrob · 09-05-2007, 12:41 PM

I could not tell what version was on mine when I plugged it into the PC, it does't really say anywhere I could find, so best thing to do it just reload it with the version you want so you know for sure!

USCTrojan4Life · 09-05-2007, 03:32 PM

Quote:

Originally Posted by AlViN

install procede into ur car
download procede software into your laptop
connect procede to your laptop
voila!

where in socal are u? can you help me w/ the install?? I'm in LA (Los Feliz to be more specific)

David 12 · 09-05-2007, 11:34 PM

USCTrojan, are you coming to Nebraska to see the game in a couple weeks?

If so, I could help you with the install after Nebraska beats USC (yes, a little wishful thinking on my part!)

Dave

CleanAudi · 09-06-2007, 12:15 AM

Quote:

Originally Posted by USCTrojan4Life

where in socal are u? can you help me w/ the install?? I'm in LA (Los Feliz to be more specific)

Hey let me know if you need help with the install. I am located in West LA

USCTrojan4Life · 09-06-2007, 01:28 AM

Quote:

Originally Posted by CleanAudi

Hey let me know if you need help with the install. I am located in West LA

dude! it's me from awot! I paged you there.

turbocoins · 09-06-2007, 06:43 AM

Quote:

Originally Posted by David 12

USCTrojan, are you coming to Nebraska to see the game in a couple weeks?

If so, I could help you with the install after Nebraska beats USC (yes, a little wishful thinking on my part!)

Dave

+1 GO BIG RED!!

Blk07335i · 09-06-2007, 07:00 AM

Quote:

Originally Posted by gobo335i

Not to jack the thread, but I also have the 1.47 in a box and a v2.0 ordered. If I was to install this now...how do I make the thing wireless so I dont have to take the thing apart every time I want upgraded software? Is there a slick solution for this? Can I use a serial/bluetooth adapter without problems?

Another stupid question...is the PROceed software PC only? I'm a MAC based designer guy. Might need to setup a dual boot machine huh?

Thanks and good luck on your install too!

I have a Mac laptop and I use Virtual PC to run the Procede update software. Works perfectly.

gobo335i · 09-06-2007, 11:05 AM

Quote:

Originally Posted by Blk07335i

I have a Mac laptop and I use Virtual PC to run the Procede update software. Works perfectly.

Thats great news

...I am going to set up parallels here in the next day or two. One more question...has anyone tried using the MAC running Windows with a Bluetooth/Serial adapter to do this whole thing wireless? That would be the trick setup for sure.

DrewKo · 09-06-2007, 10:53 PM

Quote:

Originally Posted by gobo335i

Thats great news

...I am going to set up parallels here in the next day or two. One more question...has anyone tried using the MAC running Windows with a Bluetooth/Serial adapter to do this whole thing wireless? That would be the trick setup for sure.

I thought about it, but it is easy enough just to plug the cable into the Procede. It would be great for data tracking though. I'm not aware of anyone wirelessly synching with the Procede through a Mac, but Eugene has a full wireless set up for his PC. In fact, I think he is selling it now and started a thread. It would work in the same vein for the Mac running a windows os.

gobo335i · 09-07-2007, 10:21 AM

Thanks for the details. Can you please post the link for Eugene's thread on wireless syncing or at least help me find him! I have used the search feature with no luck. I will definitely post results when I am up and operational. Cheers.

e.n335 · 09-07-2007, 12:50 PM

Quote:

Originally Posted by gobo335i

Thanks for the details. Can you please post the link for Eugene's thread on wireless syncing or at least help me find him! I have used the search feature with no luck. I will definitely post results when I am up and operational. Cheers.

http://www.e90post.com/forums/showthread.php?t=82507

09-04-2007, 02:56 PM	#1
USCTrojan4Life Private First Class 26 Rep 130 Posts Drives: 2019 530e M sport Join Date: Jul 2007 Location: DFW iTrader: (1)	Purchased a never-installed Procede from friend. Couple questions.. how can I check which version of software is on the system? Obviously it's not v2.0, but is there a way I can make sure it's 1.47? Also, do you guys think I should just wait for v2.0 before installing or should i install it w/ v1.47 and then upgrade when i get the 2.0 (which i ordered today)? I don't think i'm going to be one of the guys getting the first batch, so who knows when i will get my upgrade. Thanks for your input.
	Appreciate 0 Tweet Quote

09-04-2007, 03:07 PM	#3
AlViN Enlisted Member 3 Rep 41 Posts Drives: 07 TI 335i Join Date: Mar 2007 Location: So Cal iTrader: (0)	install procede into ur car download procede software into your laptop connect procede to your laptop voila! __________________
	Appreciate 0 Quote

09-04-2007, 04:20 PM	#4
rooster3.0 Major 27 Rep 1,306 Posts Drives: E92 335i Join Date: Nov 2006 Location: Jersey iTrader: (4)	there should be a paper in the same bag as the fuse jumper and coupler. this paper will tell you the version your running. You should install it asap, and get used to the new power. The car is amazing with 1.47, i can only imagine what 2.0 will be like.
	Appreciate 0 Quote

09-05-2007, 09:50 AM	#5
gobo335i Toy Wrangler 11 Rep 193 Posts Drives: 135i - GoCart on Steroids Join Date: May 2007 Location: Los Angeles, California iTrader: (0)	Not to jack the thread, but I also have the 1.47 in a box and a v2.0 ordered. If I was to install this now...how do I make the thing wireless so I dont have to take the thing apart every time I want upgraded software? Is there a slick solution for this? Can I use a serial/bluetooth adapter without problems? Another stupid question...is the PROceed software PC only? I'm a MAC based designer guy. Might need to setup a dual boot machine huh? Thanks and good luck on your install too! __________________ Had a 335i. It was a highway missile. Traded to a 135i. It's a go-cart on steroids.
	Appreciate 0 Quote

09-05-2007, 12:41 PM	#8
roadkillrob Major General 866 Rep 5,450 Posts Drives: 08 335i,22 X3M, 2012 C63 Black Join Date: Jul 2007 Location: Boston iTrader: (15)	I could not tell what version was on mine when I plugged it into the PC, it does't really say anywhere I could find, so best thing to do it just reload it with the version you want so you know for sure!
	Appreciate 0 Quote

09-05-2007, 11:34 PM	#10
David 12 Major 127 Rep 1,048 Posts Drives: 2019 BMW X5 50i BSM, M Sport Join Date: Jan 2007 Location: Omaha iTrader: (0)	USCTrojan, are you coming to Nebraska to see the game in a couple weeks? If so, I could help you with the install after Nebraska beats USC (yes, a little wishful thinking on my part!) Dave
	Appreciate 0 Quote

09-07-2007, 10:21 AM	#17
gobo335i Toy Wrangler 11 Rep 193 Posts Drives: 135i - GoCart on Steroids Join Date: May 2007 Location: Los Angeles, California iTrader: (0)	Thanks for the details. Can you please post the link for Eugene's thread on wireless syncing or at least help me find him! I have used the search feature with no luck. I will definitely post results when I am up and operational. Cheers. __________________ Had a 335i. It was a highway missile. Traded to a 135i. It's a go-cart on steroids.
	Appreciate 0 Quote