[Down_Shift]

BIMMERPOST / Classifieds

Asking Price:

USD 175.00

Location:

✓ Will Ship

Item Interest

SOLD takes it. Willing to ship anywhere Cont. US. (canada maybe extra)




Still in the box it was shipped in. this is a replacement to the original kit I bought which I installed down to the last steps and realized they sent me the wrong harness. So I packed it all up and returned it to them. They sent me a new kit and made sure it was all correct.

Freshly received today. Opened to make sure it looked good.
this thing is very very easy to install, they did a good job including all the hardware. Hardest part was messing with the interior trim (my first time removing interior on a BMW).
The gauge matches the interior lighting. Also does a good test sweep at initial start up.

http://www.ecstuning.com/BMW-E90-335...uge/ES2588091/

I'm in Boston. Copley/Pru.

Make Model Submodel Engine
BMW E90 325i N52 3.0L
BMW E90 325xi N52 3.0L
BMW E90 328i N52 3.0L
BMW E90 328xi N52 3.0L
BMW E90 330i N52 3.0L
BMW E90 330xi N52 3.0L
BMW E90 335i N54 3.0L
BMW E90 335xi N54 3.0L
BMW E92 328i N52 3.0L
BMW E92 328xi N52 3.0L
BMW E92 335i N54 3.0L
BMW E92 335is N54 3.0L
BMW E92 335xi N54 3.0L
BMW E93 328i N52 3.0L
BMW E93 335i N54 3.0L
BMW E93 335is N54 3.0L

BMW Boost Gauge - 45mm 1
Vent Pod - Left Center Vent 1
Plastic Wire Tie - Pack Of 10 1
OE Style Black Cloth Braided Vacuum Hose 1
Plastic Vacuum Tubing Kit - 8 Foot Secti 1
Rubber Surround Band For Boost Gauge 1
Nylon Insulated Male Snap Plug 2
Nylon Insulated Female Snap Plug 2
16-14AWG Snap Connector - Male 2
12-10AWG Snap Plug Connector - Female

[meza0531]

PM me best price shipped USPS Priority mail to an APO (military) address? Zip 09128, thanks in advance!

[Toda Party]

I would be interested, depending on what car the harness is for?

[Down_Shift]

Originally Posted by Toda Party

I would be interested, depending on what car the harness is for?

It is a general harness. You will splice into the power wire and ground wires behind the center dash for the cigarette plug as well as the dimmer wire for the radio. The kit includes all the taps to make it happen without a mess. You can also solder if you have the tools to do it, but the tap kit that the kit includes is 100% removable since the taps disconnect from the harness.

Harness is for powering the gauge and boost sensor.

Here's a PDF of the installation. Like I said, simple other than the pulling the dash (if you haven't before)
http://bd8ba3c866c8cbc330ab-7b26c6f3...structions.pdf

there's another PDF hanging around the internet also. I believe this one is the most up to date.

[Down_Shift]

SOLD