[Marcadelic]

So I finally got around to ordering a usb cable after having a jb4 for almost a year and I'm trying to download the software for my windows computer so I can run some logs but it doesn't seem to be working. It says verifying requirements in the launching application window and then says application cannot be started contact vendor. Am I doing something wrong?


this is where I downloaded it from http://www.n54tech.com/forums/showthread.php?t=10605

[E90Company]

Last I can recall you need .NET framework installed. I would check that.

[Marcadelic]

Originally Posted by E90Company

Last I can recall you need .NET framework installed. I would check that.

tried downloading it and it says there's no english version available anymore

nvm i found one, hopefully this works

[Marcadelic]

got to work! thanks @e90company don't know why having that application wasn't mention else where

[E90Company]

Originally Posted by Marcadelic

got to work! thanks @e90company don't know why having that application wasn't mention else where

Cool! No problem.

[Marcadelic]

Originally Posted by E90Company

Cool! No problem.

just did a quick 40-100 pull. Does everything look good on this or do I need a baseline run as well to compare the two?

[E90Company]

Originally Posted by Marcadelic

just did a quick 40-100 pull. Does everything look good on this or do I need a baseline run as well to compare the two?

Your timing and boost look good, but you are maxing out your fueling and running a bit lean in those areas. You have ethanol mixed in? What's your open loop set at?

[A418t81]

Were you running any E85? If not and this is just pump gas it looks pretty good other than your trims being a bit high. Kinda weird that your trims look like E85 but your timing looks a lot more like pump gas.

[Marcadelic]

Originally Posted by E90Company

Your timing and boost look good, but you are maxing out your fueling and running a bit lean in those areas. You have ethanol mixed in? What's your open loop set at?

i had ethanol mixed in on my last tank it was around a 30/70 mix, i ran it down to 0 miles till empty today before i filled up, i could have a little left in my tank i guess. My loop is set at 80.

[E90Company]

Originally Posted by Marcadelic

i had ethanol mixed in on my last tank it was around a 30/70 mix, i ran it down to 0 miles till empty today before i filled up, i could have a little left in my tank i guess. My loop is set at 80.

Hm. Yea, your trims are a bit high for pump. I would just raise OL to 85 or 90 and you should be good.

[Marcadelic]

Originally Posted by E90Company

Hm. Yea, your trims are a bit high for pump. I would just raise OL to 85 or 90 and you should be good.

ok thanks! i'll be upgrading to the g5 board soon too