Parrot ck3000 evolution bmw e90

ZJS335i · 08-24-2013, 02:31 PM

So i recently installed the parrot ck3000 evo with the connects2 adapter! All my controls work but im am getting no sound out of the speakers! I also dont hear the "menu" when i push the center knob. Any ideas?

ZJS335i · 08-24-2013, 06:33 PM

bump anything!!!

ZJS335i · 08-25-2013, 08:50 AM

bump anyone?

ZJS335i · 08-26-2013, 01:33 PM

has no one had this problem before?

NormE91 · 08-27-2013, 05:05 PM

I have the same setup. I remember I had a problem at first and it ended up being the connection to the Parrot control pad... If I recall correctly, it connects with a small black connector with 3 or 4 pins. You CAN plug it in wrong! If you look at it carefully it is keyed, but I had mine plugged in wrong at first. Unplugged it and plugged it in correctly and everything started working.

Good luck and please report back!

ZJS335i · 08-27-2013, 09:57 PM

Quote:

Originally Posted by NormE91

I have the same setup. I remember I had a problem at first and it ended up being the connection to the Parrot control pad... If I recall correctly, it connects with a small black connector with 3 or 4 pins. You CAN plug it in wrong! If you look at it carefully it is keyed, but I had mine plugged in wrong at first. Unplugged it and plugged it in correctly and everything started working.

Good luck and please report back!

no that worked fine, i just cant seem to get sound from the bluetooth!

NormE91 · 08-28-2013, 06:11 AM

Bummer. I was hoping that was it. I would pull everything and double/triple check all of the connections are tight and correct. That one little connection threw my whole system off, it didn't just affect the control unit. It just shows what one wrong connection can do to you.

There's also a reset you can do to the Parrot. You'll have to check the manual but I think it involved holding down both buttons for a number of seconds.

08-24-2013, 02:31 PM	#1
ZJS335i Private 0 Rep 58 Posts Drives: black e90 335i Join Date: Jun 2013 Location: nova/sterling iTrader: (0)	Parrot ck3000 evolution bmw e90 So i recently installed the parrot ck3000 evo with the connects2 adapter! All my controls work but im am getting no sound out of the speakers! I also dont hear the "menu" when i push the center knob. Any ideas?
	Appreciate 0 Tweet Quote

08-24-2013, 06:33 PM	#2
ZJS335i Private 0 Rep 58 Posts Drives: black e90 335i Join Date: Jun 2013 Location: nova/sterling iTrader: (0)	bump anything!!!
	Appreciate 0 Quote

08-25-2013, 08:50 AM	#3
ZJS335i Private 0 Rep 58 Posts Drives: black e90 335i Join Date: Jun 2013 Location: nova/sterling iTrader: (0)	bump anyone?
	Appreciate 0 Quote

08-26-2013, 01:33 PM	#4
ZJS335i Private 0 Rep 58 Posts Drives: black e90 335i Join Date: Jun 2013 Location: nova/sterling iTrader: (0)	has no one had this problem before?
	Appreciate 0 Quote

08-27-2013, 05:05 PM	#5
NormE91 Captain 18 Rep 629 Posts Drives: 2007 BMW 328xi Touring Join Date: Feb 2013 Location: Massachusetts iTrader: (0)	I have the same setup. I remember I had a problem at first and it ended up being the connection to the Parrot control pad... If I recall correctly, it connects with a small black connector with 3 or 4 pins. You CAN plug it in wrong! If you look at it carefully it is keyed, but I had mine plugged in wrong at first. Unplugged it and plugged it in correctly and everything started working. Good luck and please report back!
	Appreciate 0 Quote

08-28-2013, 06:11 AM	#7
NormE91 Captain 18 Rep 629 Posts Drives: 2007 BMW 328xi Touring Join Date: Feb 2013 Location: Massachusetts iTrader: (0)	Bummer. I was hoping that was it. I would pull everything and double/triple check all of the connections are tight and correct. That one little connection threw my whole system off, it didn't just affect the control unit. It just shows what one wrong connection can do to you. There's also a reset you can do to the Parrot. You'll have to check the manual but I think it involved holding down both buttons for a number of seconds.
	Appreciate 0 Quote