11-28-2013, 01:38 AM | #1 |
Private First Class
31
Rep 194
Posts |
Hey guys
It looks like the VMR V710s may not fit the F32. How about these rims with the off sets below? Would ss0803 and VMRWheels care to advise? Thx!!! http://www.ebay.com.au/itm/130872049060?redirect=mobile" rel="nofollow" target="_blank">http://<a href="http://www.ebay.com....ect=mobile</a>" rel="nofollow" target="_blank">http://<a href="http://<a href="http...mobile</a></a>" rel="nofollow" target="_blank">http://<a href="http://<a href="http...le</a></a></a> - Model Number: V703-120-72.6-GM - Front Size: 19x8.5 inch - Rear Size: 19x9.5 inch - Front offset: 8.5 inch 40 mm - Rear offset: 9.5 inch 45 mm - Pitch Center Diameter: 120 mm - Hole: 5 - Center Bore: 72.6 mm - Color: Gun Metal |
11-28-2013, 02:59 AM | #2 | |
Major General
1865
Rep 5,140
Posts |
Quote:
VMR V710: velocitymotoring.com F: 8.5x19" ET35 R: 9.5x19" ET45 I think one of the rear offsets in your previous thread was wrong when compared to VMR's site. You stated ET50 for the rear, but it looks like it is ET45. VMR V703: velocitymotoring.com F: 8.5x19" ET40 R: 9.5x19" ET45 In summary a front wheel with 8.5" width and offset 35 and a rear with 9.5" width and offset around 40 will give a nice fitment on F32. A wide stance but not too aggressive! Closest to that is V710 with 8.5" ET35 front and 9.5" ET45 rear. The rear wheel will be 5mm further in, but it will still be wide compared to stock (like a 15mm spacer on OEM 19" M Sport rear wheel). If you like V703 better you can check the possibility to use spacers on the front wheels, 5mm spacer will give ET35 and 10mm will give ET30. However a direct fit is always better in my opinion. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|