How to Sell a used car and PASS emissions

3coupe · 05-13-2014, 02:12 AM

Hello,

I have never sold a used car before. I was told just go to the ministry of transportation and take a used car package. Any other advice?

Secondly,

Can i sell the car privately without safety and etest? safety is only rear brake pads.

Thirdly,

I have a catless downpipe and a procede v5 tune. Apparently i can't pass e-test. If i swap to my stock downpipes, i have to enable the o2 sensor again, does anyone remember how to do this? just CAN clear off?

any advice would be great. i am trying to sell my car as I am moving out of the country.

jc_bmw · 05-13-2014, 06:35 AM

Assuming you're in Ontario, you might want to read through this
http://www.mto.gov.on.ca/english/dan...cle/used.shtml

If you want to sell a car that does not pass safety or emissions you need to let the buyer know you're selling "As Is" and safety and emissions not included.

If it is only rear brake pads most used car dealers just slap on some cheap brakes... you could technically do the same.

Enabling O2 is through coding.

SaugaSoul92 · 05-13-2014, 05:42 PM

i did my etest on monday...i have catless dp and still passed, you are allowed 1 not ready in the emissions readiness monitor. if you put the oem dps on the car needs to be driven for a few days afterwards for the system to register as ready..hth

e92m3jb · 05-13-2014, 06:58 PM

Quote:

Originally Posted by crunk///e92

i did my etest on monday...i have catless dp and still passed, you are allowed 1 not ready in the emissions readiness monitor. if you put the oem dps on the car needs to be driven for a few days afterwards for the system to register as ready..hth

Did u run dp fix?

SaugaSoul92 · 05-14-2014, 09:34 AM

no dp fix.. ijust got cat not ready in the reading and no check engine light

e92m3jb · 05-14-2014, 12:43 PM

Quote:

Originally Posted by crunk///e92

no dp fix.. ijust got cat not ready in the reading and no check engine light

are u using cobb or jb4?

SaugaSoul92 · 05-14-2014, 03:04 PM

im running a mark dsylva tune , now that i have my emissions done im gonna look into jb4 tho

3coupe · 05-15-2014, 02:12 AM

how do you turn off the dp o2 fix?

ASPEC135i · 05-16-2014, 04:57 PM

^ you take it off. You're not supposed to run your car long with it on. Willing to sell? I'm looking for one

3coupe · 05-30-2014, 04:17 AM

How do you turn off the o2 sensor override on the process???

05-13-2014, 02:12 AM	#1
3coupe Captain 31 Rep 645 Posts Drives: BMW 335i Coupe 07 Join Date: May 2007 Location: Somewhere. iTrader: (2)	How to Sell a used car and PASS emissions Hello, I have never sold a used car before. I was told just go to the ministry of transportation and take a used car package. Any other advice? Secondly, Can i sell the car privately without safety and etest? safety is only rear brake pads. Thirdly, I have a catless downpipe and a procede v5 tune. Apparently i can't pass e-test. If i swap to my stock downpipes, i have to enable the o2 sensor again, does anyone remember how to do this? just CAN clear off? any advice would be great. i am trying to sell my car as I am moving out of the country. __________________ BMW E92 335i retired: 04 BMW M3 \| 05 Honda S2000 \| 03 BMW 330ci \| 01 Honda Prelude \| 99 Acura Type-R
	Appreciate 0 Tweet Quote

05-13-2014, 06:35 AM	#2
jc_bmw First Lieutenant 59 Rep 383 Posts Drives: 2009 BMW 328i E90 Join Date: Jun 2013 Location: Markham, Ontario iTrader: (3)	Assuming you're in Ontario, you might want to read through this http://www.mto.gov.on.ca/english/dan...cle/used.shtml If you want to sell a car that does not pass safety or emissions you need to let the buyer know you're selling "As Is" and safety and emissions not included. If it is only rear brake pads most used car dealers just slap on some cheap brakes... you could technically do the same. Enabling O2 is through coding. __________________ 09 E90 328i 3IM, Eurocharged, K&N, 80W LED Angel Coding: Digi Speed, Express Up Fob, Wipe Wash Count, Weather Station, Headlight Sensitivity
	Appreciate 0 Quote

05-13-2014, 05:42 PM	#3
SaugaSoul92 Private 4 Rep 92 Posts Drives: aw///e92 Join Date: Apr 2014 Location: Sauga iTrader: (0)	i did my etest on monday...i have catless dp and still passed, you are allowed 1 not ready in the emissions readiness monitor. if you put the oem dps on the car needs to be driven for a few days afterwards for the system to register as ready..hth
	Appreciate 0 Quote

05-14-2014, 09:34 AM	#5
SaugaSoul92 Private 4 Rep 92 Posts Drives: aw///e92 Join Date: Apr 2014 Location: Sauga iTrader: (0)	no dp fix.. ijust got cat not ready in the reading and no check engine light
	Appreciate 0 Quote

05-14-2014, 03:04 PM	#7
SaugaSoul92 Private 4 Rep 92 Posts Drives: aw///e92 Join Date: Apr 2014 Location: Sauga iTrader: (0)	im running a mark dsylva tune , now that i have my emissions done im gonna look into jb4 tho
	Appreciate 0 Quote

05-15-2014, 02:12 AM	#8
3coupe Captain 31 Rep 645 Posts Drives: BMW 335i Coupe 07 Join Date: May 2007 Location: Somewhere. iTrader: (2)	how do you turn off the dp o2 fix? __________________ BMW E92 335i retired: 04 BMW M3 \| 05 Honda S2000 \| 03 BMW 330ci \| 01 Honda Prelude \| 99 Acura Type-R
	Appreciate 0 Quote

05-16-2014, 04:57 PM	#9
ASPEC135i Lieutenant 16 Rep 566 Posts Drives: sideways always Join Date: Oct 2012 Location: location, location iTrader: (0)	^ you take it off. You're not supposed to run your car long with it on. Willing to sell? I'm looking for one
	Appreciate 0 Quote

05-30-2014, 04:17 AM	#10
3coupe Captain 31 Rep 645 Posts Drives: BMW 335i Coupe 07 Join Date: May 2007 Location: Somewhere. iTrader: (2)	How do you turn off the o2 sensor override on the process???
	Appreciate 0 Quote