Cutting required?

m4282 · 03-04-2017, 08:40 PM

Hey does anyone know if I will need to cut to fit a Remus non resonated mid pipe to a stock non ZCP exhaust? Or will it bolt on to both ends? (Downpipe and axleback)

Thx

LOW4LYF · 03-04-2017, 09:13 PM

Cutting needed... but it's sounds really good!

m4282 · 03-04-2017, 10:20 PM

Quote:

Originally Posted by Figurka

Cutting needed... but it's sounds really good!

Thanks! Trying to avoid cutting- would it pair without cutting then to a dinan axleback?

TurboM · 03-04-2017, 10:35 PM

The exhaust is 1 piece between the end of the downpipes all the way to the muffler tips. Cutting is required for pretty much any modification. Don't let it discourage you though as even the installation of the BMW M Performance Exhaust ("MPE") also requires cutting. There is a mark on the piping to show you where to cut so you can't screw it up. BMW offers OEM/approved clamps for all cars and piping diameters as well.

m4282 · 03-05-2017, 06:01 AM

Thanks all!

alz0rz · 03-06-2017, 12:09 PM

Cutting is NOT a big deal, do not be discouraged.

mike@x-ph.com · 03-08-2017, 06:49 PM

Quote:

Originally Posted by m4282

Hey does anyone know if I will need to cut to fit a Remus non resonated mid pipe to a stock non ZCP exhaust? Or will it bolt on to both ends? (Downpipe and axleback)

Thx

Any midpipe will need cutting to attach to the stock exhaust ... That being said cutting takes less than 5 minutes and midpipes are provided with clamps for easy attachment

m4282 · 03-09-2017, 11:13 AM

Quote:

Originally Posted by mike@x-ph.com

Quote:

Originally Posted by m4282

Hey does anyone know if I will need to cut to fit a Remus non resonated mid pipe to a stock non ZCP exhaust? Or will it bolt on to both ends? (Downpipe and axleback)

Thx

Any midpipe will need cutting to attach to the stock exhaust ... That being said cutting takes less than 5 minutes and midpipes are provided with clamps for easy attachment

Thanks! Yea I actually just orders the REMUS rear from your website (under name "mo"). One of the things I wanted was to revert back to stock without signs of cutting if I choose to trade in the m4 in the future.

Btw you guys have the best prices I have seen for all parts to date!

03-04-2017, 08:40 PM	#1
m4282 Lieutenant 119 Rep 423 Posts Drives: Tanzanite Blue M4 w/Leather Join Date: Aug 2016 Location: NJ iTrader: (0)	Cutting required? Hey does anyone know if I will need to cut to fit a Remus non resonated mid pipe to a stock non ZCP exhaust? Or will it bolt on to both ends? (Downpipe and axleback) Thx
	Appreciate 0 Tweet Quote

03-04-2017, 09:13 PM	#2
LOW4LYF Brigadier General 2171 Rep 4,116 Posts Drives: E92 M3 & F85 X5M Join Date: Jul 2016 Location: @Home iTrader: (1)	Cutting needed... but it's sounds really good!
	Appreciate 0 Quote

03-04-2017, 10:35 PM	#4
TurboM Captain 252 Rep 674 Posts Drives: 2018 F82 M4 ZCP Join Date: Nov 2013 Location: Atlanta iTrader: (1)	The exhaust is 1 piece between the end of the downpipes all the way to the muffler tips. Cutting is required for pretty much any modification. Don't let it discourage you though as even the installation of the BMW M Performance Exhaust ("MPE") also requires cutting. There is a mark on the piping to show you where to cut so you can't screw it up. BMW offers OEM/approved clamps for all cars and piping diameters as well.
	Appreciate 0 Quote

03-05-2017, 06:01 AM	#5
m4282 Lieutenant 119 Rep 423 Posts Drives: Tanzanite Blue M4 w/Leather Join Date: Aug 2016 Location: NJ iTrader: (0)	Thanks all!
	Appreciate 0 Quote

03-06-2017, 12:09 PM	#6
alz0rz What goes here? 454 Rep 1,356 Posts Drives: 2019 G30 M550i Join Date: Aug 2011 Location: Florida Space Coast iTrader: (4) Garage List 2019 BMW M550i [0.00] 2021 BMW M3 Competi ... [0.00] 2019 BMW M5 Competi ... [0.00] 2016 BMW M3 [0.00] 2014 BMW M235i [0.00]	Cutting is NOT a big deal, do not be discouraged. __________________ 2019 G30 M550i GBNF: 2021 G80 M3, 2019 F90 M5 Competition, 2016 F80 M3, 2014 F22 M235i
	Appreciate 0 Quote