|
|
|
01-12-2018, 05:28 PM | #1 |
Enlisted Member
5
Rep 45
Posts |
anyone running Apex ACR8 17X9 et42?
I found a used set for sale some people say they will fit otheres say no.
thoughts? id love to run 245 front 275 rear if not direct fit what would need to be done? |
01-12-2018, 06:39 PM | #2 |
Captain
214
Rep 988
Posts |
I run it with a 255/40 Z2SS. Up front, I maxed my camber plates, and roll and pulled the fenders but still rubs at the edge where it meets the bumper. Plus a 10mm spacer
TCK struts are on the narrower side so I don't think I need the spacer, plus to consider you want to do 245s, possibly a narrower profile tire it might actually clear in front. Rear isn't fitting a 275 unless you want to flare out of the quarters. My 255s already touch the end where it meets the bumper under max compression (which only happens when going up a steep incline at angle). The quarters are already rolled and pulled, but as is the case with the non M e82 and e9x, the arches taper in so far and can hardly be pulled or rolled at those edges.
__________________
MHD | BMS | VRSF | APEX | RECARO | TC Kline | BERK | Turner Motorsport | Eibach | BMW Performance
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|