FS: Track ready 2011 E92 m3

[nicksm3]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

Pictures are below and you can see more of the car with on board videos on my IG: Alchemist_Nickzak

THIS IS NOT A SHOW CAR, ITS A PURPOSE BUILT CAR FOR TRACK DUTY AND MODERATE STREET DRIVING.

This car has been built for dual purpose. You can Drive to and from to work, the track etc. Basically a GTS that has all the right stuff!

I will not tolerate lowball offers, trades so please save it. You can ask the crew at AUTOCOTURE MOTORING in Fairlawn NJ as they can vouch for this machine.

-At LIMEROCK I run 59's on a street tire going 8/10's. On a slick 58's
-At WATKINS GLEN first time ever there and on Day one before I had installed the MCS "running H&R coilovers..I ran 2:11's/2:12's.
This car is fast and is reliable with ZERO hiccups.

* SLON DCT Pan is en route from Europe - zero lag in shifting on track - bigger oil pan, no starvation under heavy lateral G

-Asking Price $66,000 (914) 659-7588
-Clean title, ZERO ACCIDENTS!
-35k miles
-Competition Package, DCT, Navigation
- **OEM stock black leather seats, rear seats, hardware, rear Panels, OEM brakes Rotors and calipers, OEM Suspension, OEM Sway Bars are all included with the sale! I repeat all is included with the Sale!

Preventative Maintenance:
-Rod bearings replaced at 33k miles as a precaution. "I have pics of original bearings". ... before replacement of bearings the Blackstone reports haven't detected anything at all with the original bearings but I'm anal and went ahead with precaution.
-Diff fluid flush at 33.5k miles
-Spark Plugs replaced at 32k miles
-Oil change done after every 3rd trackday "roughly every 400 miles or so"
-New Hubs and Bearings replaced at 33k miles

Modifications/Chasis:
-Alekshop Solid rear Subframe Mounts
-Alekshop Solid Diff mounts
-Front Monoball Bearings

Modifications/Suspension:
-MCS Remote Reservoir Double Adjustable Kit from Bimmerworld.
-Ground Control Race Camber Plates
-Helper Springs with Dividers Both Front and Rear (keeps springs seated when you jack up the)
-Hyperco 600/6" Front Springs
-Hyperco 900/7" Rear Springs
-Ground Control Rear Height Adjusters
-Rear Shock Mounts
-Torrington Bearings on the Front Springs (No spring bind when turning the wheel)
-Proper Swaybar Endlinks for these shocks
-H&R sway bars

Modification/Brakes:
-PFC BBK FRONT and Rear - just installed few hundred miles ago
-SRF brake fluid
-Braided stainless steel Lines
-Cantrell Motorsports Brake Duct Kit
-Turner 90mm stud kit
- BimmerWorld carbon fiber brake cooling back plates with 3in hoses to front Lip.

Modifications/Exterior:
-Seibon Carbon Fiber vented hood
-GT4 front carbon lip (Modecarbon) Brad new
-GTS adjustable wing (Modecarbon) with OEM TRUNK
-APR GT250 67inchbWing
-DOWNFORCE USA Rear carbon Diffuser
-911 Riviera matte blue Wrap with Black wrap design in the rear
-light tint on headlights for debris protection
-Satin black Sun guard on windshield
-Pulled rear quarter panels 1/2" to accommodate wider wheels and tires
-CARTEK FIA LED rain/brake light in rear bumper

Modifications/Interior:
* Interior is Gutted from driver back to truck. I have all the interior pieces that will come with the car....
-oem flat bottom steering wheel "blue 12o'clock strip"
-Brand new Recaro Hans XL SEAT with passenger Profi XL
-Planted Seat Bracket with recaro Supports "adjustable sliding seats"
-OEM BMW GTS Harness Bar shipped direct from Germany *NOT A KNOCK OFF. Same Harness bar BMW USED IN THE ORANGE LIMITED BUILT E92 m3 4.4L
-SCHROTH 6pt harnesses x2
-Gutted back seat/rear
-RS red door Pulls "easily reversible"

Modifications/Engine
-K&N cold air intake "gold foil heat wrapped"
-CSF OIL, tranny, power steering and radiator coolers
-macht schnell x pipe
-ESS exhaust system
-ESS TUNE

Modification/Wheels:
-Built by BBS - THE FIRST IN THE USA TO HAVE THE OPEN LUG FACE CUSTOM BUILT FOR THE E92 m3. 18x10/18x11 E88 "open lug face"........Tires 60% life left: Pirelli Trofeo R 265's upfront and 295's rear
- Brand new APEX SM-10 18x10.5 square with 285/30/18 BFG R1 Slicks - 3 heat cycles

[jeff@autocouture]

I will for sure vouch for Nick and this car, comes into the shop for Maint and goodies, never issues! GLWS dude

[nicksm3]

Originally Posted by jeff@autocouture

I will for sure vouch for Nick and this car, comes into the shop for Maint and goodies, never issues! GLWS dude

Thank you sir

[DreamTime]

jeez... I'm not sure I can accurately measure how bad I want this car lol

[nicksm3]

Originally Posted by DreamTime

jeez... I'm not sure I can accurately measure how bad I want this car lol

Once you buy it, dreams do come true

[Samo6556]

Good luck with the sale! What's next?

[nicksm3]

Bump

[xander_g]

Sweet build! GLWS

[nicksm3]

Originally Posted by xander_g

Sweet build! GLWS

Thank you !

[roastbeef]

Nicely done!

Lukester canards?

[nicksm3]

Originally Posted by roastbeef

Nicely done!

Lukester canards?

No sir, BimmerWorld