Car stalls after starting, rough idle and P0430 code

[ekk]

Please help.
Car has ER charge pipe, ARMA intake, Miltek catless downpipe and Akropovic evo installed.
Also has a stage 2+ tune with code start delete.
Car drives fine after tune and exhaust system installed, but idle gets rough after charge pipe and ARMA intake.
I had a "system too lean" error code occurred once a few weeks ago, cleared it and never show up again.
Today after I started the car cold, it stalled immediately, started again, it stalled again.
At the 3rd start, I gased it a couple of times and I can finally managed to get the car out of the garage, and car drove fine after that. Later on of the day same thing happened twice and car was warm (been driving for more than 30 mins).
Anyone experienced this?
Need your help here please, thank you.

[sdstatestud88]

Originally Posted by ekk

Please help.
Car has ER charge pipe, ARMA intake, Miltek catless downpipe and Akropovic evo installed.
Also has a stage 2+ tune with code start delete.
Car drives fine after tune and exhaust system installed, but idle gets rough after charge pipe and ARMA intake.
I had a "system too lean" error code occurred once a few weeks ago, cleared it and never show up again.
Today after I started the car cold, it stalled immediately, started again, it stalled again.
At the 3rd start, I gased it a couple of times and I can finally managed to get the car out of the garage, and car drove fine after that. Later on of the day same thing happened twice and car was warm (been driving for more than 30 mins).
Anyone experienced this?
Need your help here please, thank you.

Could be the MAF sensor. Some intakes have had this issue

[ekk]

Any idea how to fix this?
Please don't say change back to OEM.....

[Ghosn]

Change back to OEM

[Wmf80]

Originally Posted by ekk

Any idea how to fix this?
Please don't say change back to OEM.....

Intake is shot. Oem intake back on for good.