Eccentric Shaft Sensor Opinions?

519.E82 · 02-26-2019, 02:21 PM

Hello,
Currently doing valve cover gasket(s) and was wondering if this is "enough oil" to consider replacing the sensor? Didn't really budget for it so thought i would check/ask here first since its very expensive.

519.E82 · 02-26-2019, 06:55 PM

Anyone?

SayHack · 02-26-2019, 08:11 PM

Just replace the gasket around it, and clean those nine teeth where the sensor connects. No need to change the sensor.

519.E82 · 02-26-2019, 10:58 PM

Quote:

Originally Posted by SayHack

Just replace the gasket around it, and clean those nine teeth where the sensor connects. No need to change the sensor.

any best way to get the oil out?

SayHack · 02-27-2019, 02:45 PM

Quote:

Originally Posted by 519.E82

any best way to get the oil out?

Good question lol. Most autoparts stores sell "electronics cleaner", you can try that. The only issue is that make sure you disconnect the car battery before spraying it, and make sure the engine is cold. you can use a lint free towel to do your best to clean around the teeth.

519.E82 · 02-27-2019, 02:47 PM

Quote:

Originally Posted by SayHack

Quote:

Originally Posted by 519.E82

any best way to get the oil out?

Good question lol. Most autoparts stores sell "electronics cleaner", you can try that. The only issue is that make sure you disconnect the car battery before spraying it, and make sure the engine is cold. you can use a lint free towel to do your best to clean around the teeth.

I shall look into that. I was considering using like a medicine dropper to suck out the little bit of oil

SayHack · 02-27-2019, 06:36 PM

Quote:

Originally Posted by 519.E82

I shall look into that. I was considering using like a medicine dropper to suck out the little bit of oil

Sounds like a good idea. Give it a try.

519.E82 · 03-05-2019, 10:19 AM

Had to get a new valve cover and its -20C so i haven't put it all back together yet. anyone used any SMP - products and would recommend? The sensor is only $300 as compared to BMW's $700

https://www.rockauto.com/en/moreinfo...76&jsn=3&jsn=3

02-26-2019, 02:21 PM	#1
519.E82 Lieutenant 245 Rep 439 Posts Drives: BMW 128i Sport (Non M) Join Date: Apr 2016 Location: Ontario, Canada iTrader: (0)	Eccentric Shaft Sensor Opinions? Hello, Currently doing valve cover gasket(s) and was wondering if this is "enough oil" to consider replacing the sensor? Didn't really budget for it so thought i would check/ask here first since its very expensive. Attached Images __________________ 2008 SGM 128i - 3 Stage IM - 130i Tune - Dinan Camber Plates - BMW PE - Injen Intake - 1M Mirrors - LCI Blacklines - M4 Spoiler - Blacked 263's - Aero Bumper - Aero Side Skirts - OMGSplitter - AFE Intake Scoops
	Appreciate 0 Tweet Quote

02-26-2019, 06:55 PM	#2
519.E82 Lieutenant 245 Rep 439 Posts Drives: BMW 128i Sport (Non M) Join Date: Apr 2016 Location: Ontario, Canada iTrader: (0)	Anyone? __________________ 2008 SGM 128i - 3 Stage IM - 130i Tune - Dinan Camber Plates - BMW PE - Injen Intake - 1M Mirrors - LCI Blacklines - M4 Spoiler - Blacked 263's - Aero Bumper - Aero Side Skirts - OMGSplitter - AFE Intake Scoops
	Appreciate 0 Quote

02-26-2019, 08:11 PM	#3
SayHack Private First Class 37 Rep 131 Posts Drives: 2008 BMW 128i Join Date: Feb 2013 Location: Los Angeles, CA iTrader: (0) Garage List 2008 BMW [0.00]	Just replace the gasket around it, and clean those nine teeth where the sensor connects. No need to change the sensor.
	Appreciate 0 Quote

03-05-2019, 10:19 AM	#8
519.E82 Lieutenant 245 Rep 439 Posts Drives: BMW 128i Sport (Non M) Join Date: Apr 2016 Location: Ontario, Canada iTrader: (0)	Had to get a new valve cover and its -20C so i haven't put it all back together yet. anyone used any SMP - products and would recommend? The sensor is only $300 as compared to BMW's $700 https://www.rockauto.com/en/moreinfo...76&jsn=3&jsn=3 __________________ 2008 SGM 128i - 3 Stage IM - 130i Tune - Dinan Camber Plates - BMW PE - Injen Intake - 1M Mirrors - LCI Blacklines - M4 Spoiler - Blacked 263's - Aero Bumper - Aero Side Skirts - OMGSplitter - AFE Intake Scoops
	Appreciate 0 Quote